オフィシャルブログ

日別アーカイブ: 2022年1月28日

On gypsum board putty processing construction work

Hello!We are Office restoration Dot.Com. website.

We are doing construction finishing work of 「Interior finishing work」「Interior restoration work」mainly at Ikebukuro area, the midpoint and also in all over Kanto area, for you.

 

This time, we are explaining putty processing work after gluing gypsum board work.

Finishing to mount LGS(=light gauge steel) bedding, and after sticking up gypsum board(=screwing) work, we go on to putty processing work stage.

If without doing putty processing, as the cloth(=wall paper) sticked up on it may be floating, so we have to overglaze a few times, to flatten it,

Before that, after finished sticking up the board, we should check if the screw is well fit in, and if the screw head is well drived in.

If the screw is out from the board, the cloth may be floating up before putty processing.

Then, for preventing putty cracking, we go on sticking up fiber tape(=ramified tape) at the joint of boards.

(This stage may be omitted according to the circumstances.)

Besides, we go on sticking up so-called corner tape at the corner.

石膏ボード施工後

After the construction work of gypsum board,
(After corner tape work)

After that, at last eventually here comes the opportunity of using putty. We normally do triplet coating. As the first bedding coating, putty turns out to be rough. At the place of screw driving, the joint of boards, corner part and others, we go on smearing at large cavity area.

I have never touched putty before, however, depending on the materials, there is quite resilient.

It seems that there is some kind of putty made of hard material with which your fingers may be tiring when thinning with spatula.

パテ塗り施工途中の様子

Under puttying work appearance.
(Center part)

Next, we go on doing intermediate puttying, and finishing puttying.

Because when the putty turns dry, it will slim down(=becomes thin), and only using rough putty, it will not be flatten, so we overglaze the putty.

When overglazing, we go on puttying up wider than bed puttying, so that it becomes flat.

Puttying by capable technical workers is very flat and smooth, looking as if without the existence of board joint or screw driving.

Above is our explanation of gypsum board putty processing work.

 

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

 

Including ceiling, wall repair work, and painting work of course, as for your newly opening shop/store and renewal, please be sure to ask your inquiry to Office restoration Dot Com. website, light heartedly.

 

We are waiting for your follow up of our Instagram, Twitter, and Facebook.

 

Instagram     Twitter     Facebook   

 

From price offer to construction work finishing, our company is directly managing by ourselves, so we are supplying more reasonable and high quality and good products to you.

 

Of course, we do not mind at all if you compare our offer price with others, as we welcome it.

「Which construction company should I ask to work? How much is the approximate construction work cost? and so on.」

Besides above also, we are waiting for your questions.

 

『Office, shop or store, warehouse moving』, restoration work, reform work(interior finishing work) and so on.

Please feel free to give us your inquiry in the first place.

~~~~~~~~~~~~~~~~~~~~~~Ikebukuro~~~~~~~~~~~~~~~~~~~~~~

★If you look for interior finishing company in Ikebukuro, ask Office restoration Dot.Com★

★If you also look for office restoration work in Tokyo, ask Office restoration Dot.Com.★

Our address: 〒171-0014 4th floor, Musashiya No.3 Building, 62-10, 2-chome, Ikebukuro, Toshima, Tokyo

Free phone: 0120-978-226

~~~~~~~~~~~~~~~~~INTERIOR FINISHING COMPANY~~~~~~~~~~~~~~~~~