Hello！We are Office restoration Dot.Com. website.
We are doing construction finishing work of 「Interior finishing work」「Interior restoration work」mainly at Ikebukuro area, and also in all over Kanto area, for you.
Today, in association with our company name『Office restoration Dot Com』, we think that we would like to explain office construction work.
The necessary construction work for office work is 【Electric work】・【Air-condition・sanitary work】・【Interior finishing work】・【Prevention work】・【Telephone・LAN work】・【Crime prevention work】and so on.
The work which our company can do for you are【Air-condition・sanitary work】・【Interior finishing work】・【Prevention work】・【Crime prevention】.
Our company main work is 【Interior finishing work】.
Interior fishing work is, completing decoration of floor・wall・ceiling work, and partition work. As for floor, usually it is tile carpet. However, depending on the designs, there may be finished with polyvinyl chloride tile, flooring, tatami mat or so on.
On the wall, we can select to use cloth(wall paper), painting, decorative sheet or so on. Depending on wall kind, office atmosphere varies, so it sems that it is advisable to select materials carefully.
As for partition also, there are closed type, open type, fixed type, movable type and so on. There are a lot of choices. Furthermore, by materials, sound isolating property also differs. The price varies accordingly.
As it seems that there are variety of offices, we would like to upload several pictures for your reference as below.
Office corridor sticked plaster board, door frame work and so on.
Work at a whole office.
The work details are LGS(=light gauge steel) work・board gluing, cloth sticking and so on.
A little bit repair work at an office.
Now measuring height of ceiling at the office.
Peeled off floor mat, size measuring work operation.
Work starting from light gauge steel operation work.
Work of a whole office building.
Variety of work sites related to the office as above.
It is possible for us to respond to every office for interior finishing work・restoration work.
Whether the property is furnished or skeleton, the cost is going to change significantly. As for furnished property, because the former facility or equipment is remained, you do not normally have to spend money from the start. While, as for skeleton property, the situation is only simple framework, so we may designate it as undressed concrete vacant property.
Both of furnished property and skeleton property, either has its merit and demerit. However, judging from the cost point of view, furnished property seems to be more cost cutting.
However, as for skeleton property also, we can cut cost by without dare doing finishing of ceiling and wall, and by extracting feeling of texture. In addition, recently the designs of these kinds have been popular.
Furthermore, if you need to increase the number of rooms, you can reduce budget by using partition. Talking about partition, the variation is abundant, so you can select it according to your purpose and budget.
By using partition, large-scale construction work is not necessary. We can say that the period of influencing normal business operation turns out to be short, which is the merit too.
If you have questions・problems on office construction work, please feel free to give us inquiry.
The staff at the work section of our company will answer to you kindly and politely.
If you are in trouble of『Office renewal・shop or store renovation』, interior finishing work・restoration work and so on, please feel free to give us inquiry in the first place.
We are waiting for your follow up of our Instagram, Twitter, and Facebook.
From price offer to construction work finishing, our company is directly managing by ourselves, so we are supplying more reasonable and high quality and good products to you.
～～～～～～～～～～～～～～～～～～～～～～Ikebukuro～～～～～～～～～～～～～～～～～～～～～～
★If you look for interior finishing company in Ikebukuro, ask Office restoration Dot.Com★
★If you also look for office restoration work in Tokyo, ask Office restoration Dot.Com.★
Our address: 〒171-0014 4th floor, Musashiya No.3 Building, 62-10, 2-chome, Ikebukuro, Toshima, Tokyo
Free phone: 0120-978-226
～～～～～～～～～～～～～～～～～INTERIOR FINISHING COMPANY～～～～～～～～～～～～～～～～～
Hello！We are Office restoration Dot.Com. website.
We are doing construction finishing work of 「Interior finishing work」「Interior restoration work」mainly at Ikebukuro area, the midpoint and also in all over Kanto area, for you.
This time, we are explaining putty processing work after gluing gypsum board work.
Finishing to mount LGS(=light gauge steel) bedding, and after sticking up gypsum board(=screwing) work, we go on to putty processing work stage.
If without doing putty processing, as the cloth(=wall paper) sticked up on it may be floating, so we have to overglaze a few times, to flatten it,
Before that, after finished sticking up the board, we should check if the screw is well fit in, and if the screw head is well drived in.
If the screw is out from the board, the cloth may be floating up before putty processing.
Then, for preventing putty cracking, we go on sticking up fiber tape(=ramified tape) at the joint of boards.
(This stage may be omitted according to the circumstances.)
Besides, we go on sticking up so-called corner tape at the corner.
After the construction work of gypsum board,
(After corner tape work)
After that, at last eventually here comes the opportunity of using putty. We normally do triplet coating. As the first bedding coating, putty turns out to be rough. At the place of screw driving, the joint of boards, corner part and others, we go on smearing at large cavity area.
I have never touched putty before, however, depending on the materials, there is quite resilient.
It seems that there is some kind of putty made of hard material with which your fingers may be tiring when thinning with spatula.
Under puttying work appearance.
(Center part)
Next, we go on doing intermediate puttying, and finishing puttying.
Because when the putty turns dry, it will slim down(=becomes thin), and only using rough putty, it will not be flatten, so we overglaze the putty.
When overglazing, we go on puttying up wider than bed puttying, so that it becomes flat.
Puttying by capable technical workers is very flat and smooth, looking as if without the existence of board joint or screw driving.
Above is our explanation of gypsum board putty processing work.
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Including ceiling, wall repair work, and painting work of course, as for your newly opening shop/store and renewal, please be sure to ask your inquiry to Office restoration Dot Com. website, light heartedly.
We are waiting for your follow up of our Instagram, Twitter, and Facebook.
From price offer to construction work finishing, our company is directly managing by ourselves, so we are supplying more reasonable and high quality and good products to you.
Of course, we do not mind at all if you compare our offer price with others, as we welcome it.
「Which construction company should I ask to work? How much is the approximate construction work cost? and so on.」
Besides above also, we are waiting for your questions.
『Office, shop or store, warehouse moving』, restoration work, reform work(interior finishing work) and so on.
Please feel free to give us your inquiry in the first place.
～～～～～～～～～～～～～～～～～～～～～～Ikebukuro～～～～～～～～～～～～～～～～～～～～～～
★If you look for interior finishing company in Ikebukuro, ask Office restoration Dot.Com★
★If you also look for office restoration work in Tokyo, ask Office restoration Dot.Com.★
Our address: 〒171-0014 4th floor, Musashiya No.3 Building, 62-10, 2-chome, Ikebukuro, Toshima, Tokyo
Free phone: 0120-978-226
～～～～～～～～～～～～～～～～～INTERIOR FINISHING COMPANY～～～～～～～～～～～～～～～～～
大家好！我们是办公室修复Dot Com网站。
在东京都池袋地区为主，也在关东全域范围内，我们主要在从事『室内装饰施工工事』『室内修复原状施工工事』的单位，为客户服务。
此次，我们将要说明一下张贴石膏板材作业后的油灰处理作业。
结束了组装轻量型钢地基，做完张贴石膏板材（打进螺丝钉）作业后，我们进行油灰处理作业的工程了。
如果没做油灰处理的话，因为在那个上面张贴的织物（=壁纸）会浮动，所以应该重刷两三次油灰，而弄平表面。
之前，我们需要确认好，做完张贴板材的螺丝钉是否好好地嵌入，并螺丝钉的头部被打进好在板材里。
如果螺丝钉显出来板材上面，油灰处理之前，织物会浮动。
接着，为了防止油灰的破裂，我们逐步在板材和板材之间的接头张贴纤维胶带（网状的胶带）。
（此工程，看来有时候可以省略。）
并且，我们在角部进行张贴所谓的角部胶带。
石膏板材施工工事后。
（角部胶带工事后）
然后，终于到了油灰出来的次序。我们通常刷三次，刷第一次的地基油灰比较粗，我们逐步涂抹打进螺丝钉的地方和板材之间的接头、角部等凹陷处较大的部分。
我本人没有触摸过油灰。看来，有些材料相当有弹性，有的材质比较硬。使用刮刀弄一弄时，手指也许会很痛。
正在刷油灰施工工事途中的样子。
（在中心部分）
然后接着，中间刷、最后刷的样子，我们逐步刷油灰。
油灰干燥后变瘦（变稀了）。并且，只用较粗的油灰不会弄平，所以我们重刷了。
重刷时，我们逐步刷地比地基刷更扩大，弄更平。
够有水平的工匠刷好的油灰又平又滑，仿佛不存在板材的接头和打进螺丝钉似的。
以上是我们对石膏板材油灰处理作业的说明了。
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
当然包括天棚或墙壁的修补工事、刷涂料工事，有关贵方店铺的新开业或全更改装潢之事，务必随意地跟我方的办公室修复Dot Com 网站来查询。！
我们正在等待贵方跟进我们的「Instagram、推特、Facebook」。
从报价到施工完毕，我公司全部都是自己亲自安排工事、 我们正在给客户供应「尽可能便宜的、质量高的好产品」。
当然，贵方对我方的报价和其他的比较也不要紧的。很欢迎贵方的货比三家。
「应该拜托哪一家施工单位好？施工费用大概需要多少钱？等等。」
也除了上述以外，我方正在等待贵方提出来的疑问。
『办公室、店铺、仓库的搬迁』，室内修复原状施工工事，整建施工工事（室内工事）等等。
首先，请给我们随意地来查询一下！
～～～～～～～～～～～～～～～～～～～～池袋～～～～～～～～～～～～～～～～～～～～
★如果贵方想找池袋的室内装饰单位，务必来找办公室修复Dot .Com.网站★
★如果贵方想找东京的办公室修复原状工事单位，务必来找办公室修复Dot.Com.网站★
地址: 〒171-0014 东京都丰岛区池袋2-62-10 武藏屋第三楼四层
免费电话: 0120-978-226
～～～～～～～～～～～～～～～～～～室内装饰施工～～～～～～～～～～～～～～～～～～
