Hello, everyone！ We here are Office recovery and restoration Dot.Com. website.
Our company office is set up at Ikebukuro, Toshima ward, Tokyo, and we are an interior decorative construction work contractor, mainly taking charge of Interior decorative finishing work・Original state recovery and restoration work in all over Kanto district for you.
Please talk with us anything on the interior decorative work.
Have you ever heard of a term of pre-cutting in the interior decorative work?
Pre-cutting is pointed to be, cutting the materials properly to the required measurement in advance in the architecture and the interior decorative work.
This skill greatly contributes to construction efficiency and accuracy improvement.
In this article, we are explaining the significance of pre-cutting, its merits, and also the key of efficient construction and so on in the interior decorative work.
Pre-cutting is pointed to be, properly cutting various materials to their required measurement in advance which will be used in the architecture and the interior decorative work.
Wood, metal, plastic and others are included as these materials.
By pre-cutting, processing work operation and adjusting work operation in the construction site are greatly reduced, and processing stage efficiency is planned.
●Shortening the time period
As it is possible to reduce process work operation at the construction site to the necessity minimum, shortening the work period can be planned.
●Enhancing accuracy
As it is done by using machines in the factory, it is possible to process the materials to high accuracy.
●Reducing cost
By saving work operation time and reducing waste materials at the construction site, it is possible to cut down the cost.
Wall panel is a general material in the interior decorative work.
By carrying the pre-cut materials which were cut in advance according to the wall panel measurement to the site, and assembling them, prompt construction will become possible.
Accurate measurement is required for laying flooring.
In the construction site, it is possible to lay pre-cut flooring at the construction site in a short time, so the work operation efficiency will go up.
In the interior decorative work, chances are that fabrication furniture such as counter, shelf, and so on are sometimes required.
The furniture is made by using pre-cut materials in the factory, then is carried to the site, quick construction will be possible.
As pre-cut materials are processed in the factory, the measurement accuracy is required.
Let’s confirm the measurement before the construction and revise it if required.
It is also important to select the materials which are suitable to pre-cutting.
Considering its processing property and durability, let’s select the proper material.
Delivery management of pre-cut materials is also important.
In the work process planning, by managing pre-cutting work operation schedule properly, let’s defend delaying work period.
【Plan thoroughness】
Advanced planning is indispensable before pre-cutting.
By grasping the material kind, measurement, quantity and so on precisely, we request the factory to process them.
【Proper machine selection】
As pre-cutting is done by using the machine, selecting the proper machine is important.
Let’s select the most suitable machine according to the processing material and measurement.
【Smoothing communication】
Smooth communication with the factory is important.
By telling the process content, its delivery time and so on, let’s realize smooth pre-cutting!
In the interior decorative work, pre-cutting is one of the important methods to realize an efficient construction.
By planning thoroughly, selecting machines properly, and smoothing the communication, it will be possible to do efficient pre-cutting.
Toward improving productivity and quality at the construction site, how about trying to utilize pre-cutting ?
In the interior decorative work, pre-cutting is an important method to realize efficient construction.
The materials which were properly cut to the accurate measurement will enable a fast and accurate work operation in the construction site, and will contribute to work process efficiency and reducing its cost.
While considering various factors such as planning ideas appropriately, selecting materials, managing delivery time, and so on, let’s utilize pre-cutting and realize to enhance the quality and shorten the work period in the interior decorative work!
※Please understand that we will execute construction in Japan only.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If you are considering to request us office building・tenant(shop or store）original state recovery and restoration work, moving in work, relocation, removal, reform work, and so on, please contact our company light heartedly by all means!
You can also give us your relative inquiry from SNS social media. Please be sure to see it together.
From price quotation up to construction work completion, our company is directly managing and doing construction work by ourselves. Our aim is, to supply「reasonable construction work as much as possible, with high quality, better work service」to our customers.
◆If you look for interior decorative work・Returning to original state and restoration work in Ikebukuro,Toshima ward, please visit Office restoration Dot.Com.◆
Japanese version↓
Hello, everyone！ We here are Office recovery and restoration Dot.Com. website.
Our company office is set up at Ikebukuro, Toshima ward, Tokyo, and in all over Kanto district, we are an interior decorative construction work contractor, mainly taking charge of Interior decorative finishing work・Original state recovery and restoration work for you.
Please take counsel on anything on office interior decorative work.
To readers of this article: When you lease a rental property, have you ever heard of the phrase「Original state recovery and restoration work」?
This phrase is pointed to be an important operation work executed before you leave the rental property.
This time, we are explaining original state recovery and restoration work in detail.
Original state recovery and restoration work is, pointed to be a remedial・repair and recovery work done, when leasing a rental housing residence.
In the case of renting a property, when moving in, the environment to live in is ready. However, before leaving it, it is required to be returned to the situation when moved in.
This is called「original state recovery and restoration」, and the work for that is called「original state recovery and restoration work」。
Because of the following reasons, original state recovery and restoration work is necessary to do:
1.Executing the contract condition: In the rental property contract, before leaving it, according to the settled contract condition, it should be returned to the original situation.
By doing original state recovery and restoration work, it is possible to execute the contract condition and to prevent to occur troubles.
2.For the following renter: If the renter before remains hurting and/or stains, as the result of original state recovery and restoration, the next renter may have to stay in uncomfortable environment.
By doing original state recovery and restoration work, it is possible to supply comfortable living environment to the next renter.
3.Refunding the deposit: In many cases, when renting a property, deposit is necessary to pay.
By doing original state recovery and restoration work and returning the property to clean situation, the deposit can be refunded smoothly.
Contents of Original state recovery and restoration work are different according to the rental property situations and contract contents.
However, as general contents, there are the following details:
●Changing wall paper and floor material
●Repairing and mending hurts and holes
●Cleaning, repairing and recovering water used areas
●Repairing and changing lighting fittings
●Repairing, painting doors and windows
Original state recovery and restoration work is, an indispensable process when renting a property.
In order to observe the contract condition, to provide comfortable environment to the next renter, and to receive the refund smoothly too, it is important to execute original state recovery and restoration work sufficiently.
By returning the property to the just moved-in state, it is possible to maintain recycling of the lease property, and to realize smooth moving-in and leaving procedure.
Please also refer to the below-mentioned blog by all means.
What is the merit of requesting original state recovery and restoration work(office・shop or store relocation) to an interior decorative work company?
～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～
Finally,
On office building・tenant(shop or store)
original state recovery and restoration work, moving in work,
relocarion, withdrawal, reform work and so on, if you are considering to request,
please be sure to contact our company light heartedly!
It is also possible to give us your inquiry from SNS social media.
Please be sure to see it together.
From price quotation up to construction work completion,
our company is directly managing and doing construction work by ourselves.
Our aim is, supplying
「reasonable construction work as much as possible, and high quality, better work service」
to our customers.
◆If you look for interior decorative work・original state recovery and restoration
work at Ikebukuro, Toshima ward, please look for Office recovery and restoration Dot.Com.◆
Address: 〒171-0014
4th floor, Musashiya No.3 Building
62-10, 2-chome, Ikebukuro, Toshima ward, Tokyo
Free phone: 0120-978-226
Hello, everyone！ We here are Office recovery and restoration Dot.Com. website.
Our company office is set up at Ikebukuro, Toshima ward, Tokyo, and in all over Kanto district, we are an interior decorative construction work contractor, mainly taking charge of Interior decorative finishing work・Original state recovery and restoration work for you.
This time, we are taking up「so-called ink marking work」which is one of the indispensable skills at the construction site.
On construction work, interior decorative work, and civil engineering work, so-called ink marking work is an important work for setting reference point, and showing the precise position and angle.
Accurate so-called ink marking work is, a must for the building stability and for securing beauty.
So-called ink marking work is just the line drawn in the following picture.
So-called ink marking work at the construction site and civil engineering work is, an important work for setting reference point, and showing precise position and angle.
Based on the design drawing of building and structure, we do marking at the site ground and the wall surface, then secure work progress and building stability.
By precisely showing the pillar, wall, beam, and other location, so-called ink marking work plays a role of stabilizing the building structure.
So-called ink marking work is an important factor for securing the building beauty and symmetry too.
So-called ink marking work history and its change of importance: So-called ink marking work is a skill which has been done from long ago at the construction site.
At the buildings in ancient Egypt and ancient Rome too, so-called ink marking work skill had been used.
At that time, thread and rope were used for setting reference point. But, in the present era, high tech tools such as survey instrument, laser levelling and so on have become to be used.
The importance of so-called ink marking work changed too.
More precise measurement has been required.
So-called ink marking work is also contributing to building stability and enhancement of earthquake resisting property.
As to so-called ink marking work, a few basic terms and its tools are concerned.
Firstly, reference point is a point to show a position and angle decided in the design drawing of the building and the structure.
In order to set reference point, so-called ink marking work use thread and so-called ink marking work use peg, survey instrument, and so on are used.
So-called ink marking work use thread is used to show reference position, while so-called ink marking use peg is used for fixing thread.
As to survey instrument, there are level device, optical level, laser level and so on, and they are utilized for more precise measuring result.
Ink pot
As to so-called ink marking work, firstly, based on the building and the structure design drawing, we set reference points.
Reference points are set up at the building edge, pillar, wall and/or other important parts.
By using survey instrument, we decide on the position and height of reference points, and draw a so-called ink marking thread to match them.
So-called ink marking thread is used to show the position of reference point, and it is utilized for marking each part of the building.
For marking, so-called ink marking use peg, tape and so on are used, then we clearly show the building structure and the measurement.
So-called ink marking lines are drawn for showing the building and the structural factor.
By drawing so-called ink marking use thread along reference point, and applying ink, we make ink lines.
Ink lines are for precisely showing the position of building wall, pillar and so on.
It plays an important role for checking work progress and building structure.
For drawing the way of ink lines, it is also important to secure accurate angle.
In order to measure the angle precisely, it is typical to use survey instrument and/or level device.
So-called ink marking work precision is very important for securing building stability and exact measurement.
However, chances are that environmental factor may influence so-called ink marking work precision too.
Wind, vibration, temperature change and so on may possibly influence so-called ink marking work.
Therefore, before doing so-called ink marking work, it is important to consider environmental factor and take necessary measures.
In addition, by doing regular measurement and adjustment, it is also necessary to maintain so-called ink marking work precision.
So-called ink marking work is an indispensable skill at the construction site and civil engineering work.
By setting exact reference point and drawing ink lines, it plays a role of securing building stability and beauty.
There are basic terns, tools, and procedure for so-called ink marking work. By utilizing them suitably, it is possible to do so-called ink marking work with high precision.
Coping with environmental factor and regular adjustment are important factors for so-called ink marking work too.
For the successful work at the construction site, so-called ink marking work skill and knowledge are indispensable.
Please try to challenge so-called ink marking work at the construction site with reference to these pieces of information by all means!
～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～
On office building・tenant(shop or store)
original state recovery and restoration work, moving in work,
relocarion, withdrawal, reform work and so on, if you are considering to request,
please be sure to contact our company light heartedly!
It is also possible to give us your inquiry from SNS social media.
Please be sure to see it together.
From price quotation up to construction work completion,
our company is directly managing and doing construction work by ourselves.
Our aim is, supplying
「reasonable construction work as much as possible, and high quality, better work service」
to our customers.
◆If you look for interior decorative work・original state recovery and restoration
work at Ikebukuro, Toshima ward, please look for Office recovery and restoration Dot.Com.◆
Address: 〒171-0014
4th floor, Musashiya No.3 Building
62-10, 2-chome, Ikebukuro, Toshima ward, Tokyo
Free phone: 0120-978-226
Hello, everyone！ We here are Office recovery and restoration Dot.Com. website.
Our company office is at Ikebukuro, Toshima ward, Tokyo, and in all over Kanto district, we are an interior decorative construction work contractor, mainly taking charge of Interior decorative finishing construction・Original state recovery and restoration construction for you.
In this website blog, we are explaining various themes of office, while we are sharing construction site examples.
In order for you as a reader to read these articles with pleasure, we would like to supply useful pieces of information to those who are considering to request interior decorative work in the future.
Please take counsel on any kinds of office interior work with us.
The content which we are introducing and explaining this time is a part of「GL construction method」.
On sticking on gypsum board by using GL bond
This time, what we are explaining is not construction site example or construction state, but an actual construction method.
Tiger brand GL bond:： Quoted from Yoshino Gypsum Co.,Ltd. website
Gypsum board is one of widely used materials for interior decorative constriction.
Among them, GL bond has excellent adhesive strength and durability, so, it is effective to stick on gypsum board.
Sticking on gypsum board by using GL bond is, not only able to realize efficient and even finishing result, but also able to enhance durability.
In this article, we are explaining the method of sticking on gypsum bord by using GL bond gypsum board and its merits in detail.
GLボンドを使った施工の写真がこちら
The above is a construction picture using GL bond.
We are explaining the feature of GL bond and its usage.
GL bond is an adhesive used for sticking materials such as wood, plywood, gypsum board and so on. It has powerful adhesive strength and durability, so, it is suitable for sticking on gypsum board.
1 Preparing backing
Cleaning the wall surface, and neaten even state. If necessary, carrying on backing treatment.
2 Applying GL bond
Applying GL bond on the back side of gypsum board evenly.
Please be sure to use suitable GL bond amount, and applying it with uniformity as much as possible.
3 Sticking on gypsum board
Sticking applied GL bond surface and wall surface firmly, and sticking to gypsum board.
Then, pressing with suitable power, and securing even adhesiveness.
4 Drying and finishing treatment
After sticking on it, waiting until drying GL bond completely.
After that, doing joint treatment and finishing on the surface.
Joint treatment is, a process of treating crack, dent and so on at the gypsum board junction part in gypsum board sticking.
Gypsum board is not used as a big board, but by sticking plural board together to match the necessary size, the wall surface and ceiling are formed.
In order to fill the joint part and gap, to realize uniform and beautiful finishing, joint treatment is duly done.
Joint treatment is, an important process for neatly finishing the joint part of gypsum board in GL work method.
We are explaining the procedure of general joint treatment as follows:
1.Sticking joint tape
Sticking joint tape at the joint part of gypsum board.
Joint tape, plays a role of preventing crack, and enforcing joint part.
Let us stick the tape evenly at all of the joint part.
When sticking the tape, it is important to do this work operation by pressing the joint part firmly at the same time.
2.Applying joint compound (bond)
After sticking joint tape, filling the tape by using joint compound(bond). Joint compound, plays a role of neatening the surface of gypsum board, and unify the joint part. Let us use wide brush and sponge, and applying it to spread compound evenly.
3.Drying compound
Waiting for joint compound to be fully dried.
Let us confirm the drying time according to the product instruction.
If you want to shorten the drying time, it is possible to heat it or to use drying devise to shorten the time.
4.Sanding(polishing)
In order to smoothen the dried joint compound finishing, using sanding with sandpaper or sand sponge.
Getting rid of unnecessary 凹凸and surface roughness, neatening the joint part to even state.
After sanding, let us clean the wall surface with vacuum machine and cloth.
The above is a general procedure of joint treatment.
However, as to the concrete procedure and material usage, they may differ, depending on the site situation and construction condition sometimes.
We propose you to take counsel with a professional interior decorative contractor, and request to do a suitable joint treatment.
The picture to stick on gypsum board
・Firm adhesive strength
GL bond has excellent adhesive strength, and it firmly fixes gypsum board on the wall surface.
・Enhancing durability
Gluing with GL bond is excellent in durability, so, it protects long-term peeling and floating up of gypsum board.
・Efficient construction
By using GL bond, sticking on gypsum board work operation can be done quicky and smoothly.
・A suitable backing treatment is important. Let us clean up the wall surface and make it even politely.
・A suitable applying amount of GL bond and evenly applying are necessary. Let us carry on work operation according to the instruction, and strive to stick it on the board evenly.
If necessary, we recommend you to get an expert advice and guidance.
Sticking on gypsum board by using GL bond is, an important method on pursuing efficiency and durability in interior decorative work.
Because of the strong adhesiveness and durability, it prevents peeling and floating up of gypsum board, so, it keeps long-term beautiful finishing result.
While doing right method and suitable construction, let us stick on gypsum board by using GL bond. As the result, it may realize interior decorative finishing which excels in durability.
Your request・inquiry from here.
If you are interested or have request in interior decorative finishing work, please give us your inquiry light heartedly.
We will propose the most suitable planning and construction to match your requirement and budget.
An original state recovery and restoration construction site example using GL work method is here
～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～
If you are considering to request office building・tenant(shop or store) original state recovery and restoration work, moving in work, relocation, removal, reform work, and so on, please be sure to contact our company light heartedly!
You can also give us your inquiry from SNS social media. Please see them together by all means!
From price quotation up to construction work completion, our company is directly managing and doing construction work by ourselves.
Our aim is, supplying
「reasonable construction work as much as possible, and high quality, better work service」to our customers.
◆If you look for interior decorative work・original state recovery and restoration work at Ikebukuro, please just look for Office recovery and restoration Dot.Com.◆
Address: 〒171-0014
4th floor, Musashiya No.3 Building
62-10, 2-chome, Ikebukuro, Toshima ward, Tokyo
Free phone: 0120-978-226
Hello, everyone！ We here are Office recovery and restoration Dot.Com. website.
Our company has an office at Ikebukuro, Toshima ward, Tokyo, and we are an interior decorative construction contractor, mainly taking charge of Interior decorative finishing construction・Original state recovery and restoration construction in all over Kanto district for you.
On this website blog, we are explaining various themes at the office and sharing construction site examples. In order to let this blog readers to enjoy reading them, we are thinking of supplying easy to understand and useful information to those who would like to request interior decorative construction in the future.
Kindly take counsel with us on any office interior decorative construction.
The content which we are explaining here is, on office OA floor/flooring construction partly.
This time,
It is on
「underlay (base treatment) construction method」
Quoted from FUKUBI Chemical Industry Co.,Ltd., website underlay ※pictorial image link
For OA floor/flooring, base treatment is one of the important operation work processes.
Underlay is, a material spreading under the floor.
Its roles are preventing hurt and sound on the floor, and enhancing the floor durability.
Because it is active as a floor/flooring material for various facilities,
it can be also used not only for office OA floor, but also for elderly dwelling and facility, educational facility, and so on.
We are explaining underlay construction method as follows:
Before spreading underlay, it is necessary to treat floor surface base.
Confirming that the floor surfacer is flat, and without dirt or hindrance.
Please also confirm that it is dry well, and get rid of dust and obstacle.
If required, spread materials such as gravel, sand and so on, then set it flat.
Spreading underlay on the floor surface.
The methods of spreading the underlay are, full spreading, half spreading ad so on.
Full spreading is, the method of spreading underlay on all over.
Half spreading is, the method of spreading underlay all over at a few centi-meter inside from the edge.
Full spreading method can be maintained evenly all over the floor, but by using a lot of material. While, as for half spreading, material used quantity can be smaller. However, as a demerit, underlay is easy to be shifted.
After finish spreading underlay, if required, fixing it by using adhesive.
When using adhesive, according to the construction method, coating it evenly on the floor, and thrusting the underlay from above. After the construction, please let off air with stripping-off rod. After the adhesive is dried, it is possible to lay OA floor/flooring.
※Point to be noted when executing finishing material
After executing FUKUBI underlay construction, please cure it for equal to or over than 24 hours firstly, then execute finishing material construction.
Please avoid laying floor finishing material and FUKUBI underlay joint together.
When cutting cushion floor and vinyl floor sheet together, please do not cut them overlapped with FUKUBI underlay.
Besides, please execute construction by following the construction method of each finishing material.
Summary
The construction methods of underlay are sometimes different according to floor types and construction contractors.
The important point is, the construction contractor has the suitable skill, and execute the precise construction.
In addition, before executing construction, it is necessary to fully check the important points such as laying the plan, treating the base, and so on.
That is all for our explanation of the construction method of underlay.
Finally,
On office interior decorative construction, please take counsel with us light heartedly.
～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～
On office building・tenant(shop or store) original state recovery and restoration cnstruction・renovation decorative construction・recovery and restoration construction, moving in construction, relocation, removing, reform construction and so on, if you are considering to request, please be sure to contact us light heartedly.
It is also possible to give us your inquiry from SNS social media.
Please be sure to see it together.
From price quotation to construction work completion, our company directly manage and do all of construction work by ourselves.
So, we are supplying
「reasonable construction work as much as possible with high quality and better service」
to our customers.
◆If you look for interior decorative construction・original state recovery and
restoration construction at Ikebukuro, Toshima ward, please contact
Office recovery and restoration Dot.Com.◆
Address: 〒171-0014
4th floor, Musashiya No.3 Building
62-10, 2-chome, Ikebukuro, Toshima ward, Tokyo
Hello, everyone！
We here are Office recovery and restoration Dot.Com. website.
Our company has an office at Ikebukuro, and we are mainly taking charge of「Interior decorative construction」 「Original state recovery and restoration construction」in all over Kanto district for you.
This time, we think we are briefly partly explaining tools used at the construction site.
It is further before interior decoration construction process.
It is mainly used for base part fundamental construction or making form frame work and so on.
As for interior decoration too, when constructing ceiling part, it seems to be necessary to use it.
There is laser marker.
If you do not want to hurt the room inside, or for DIY(=do-it-yourself) and so on, it seems to be precious.
The method to fix level string, it can be considered simple methods such as rolling and wrapping on heavy stone or so and hanged stretched with heaviness, or rolling and wrapping with stud or runner and so on.
However, depending on the necessary precision level, according to its purpose, let’s execute construction with suitable method.
Standard size of LGS (=light gauge steel) varies from 2.5m(=meter) to 5m.
However, depending on the construction site, it is sometimes necessary to adjust length.
In that case, the tool directly cutting at the site is high-speed cutter (also called high-speed cutting machine).
The difference from disc grinder is, if there is an attached part to fix materials.
Compared with high-speed cutting machine, as disk grinder is supported by hands, it is a relatively small product.
While, high-speed cutting machine is made as big size , and safety, stability, cutting precision and other features enhanced product.
In fact, disc grinder is not such a product made for cutting purpose, it is a product mainly made for grinding purpose.
So, it is good to consider that the machine can be also used for cutting (not good at).
If it is frequently used for cutting, it may be considered that by buying cutting use tool, safer work operation can be done.
It may be possibly used as the feeling of a substitute or so.
As machine tools such as high-speed cutting machine or so may lead to a danger of hurting or accident without sufficient maintenance, so we suggest you to be careful, before using it too, by checking it visually, and after using it, by fully maintaining it with rust preventive oil or so, to be able to do its work operation safely .
Those who have not finished the special education of free hand grinding stone, they cannot change or test run grinding stone.
For using it safely, before starting work operation or so, we suggest you to keep in mind to test run, and to check if there is strange noise or disorder feeling, and to do your best to be able to prevent accident.
When cutting LGS with high-speed cutting machine, sparks will emit, so we advise you not to put things around, and taking measures to place flameproof sheet or so at the surroundings in advance.
That is all for our explanation today.
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-=-=-=-=-=-
Let alone ceiling, wall repair and remedial work, painting work, on shop or store new opening and renewal, please be sure to take counsel with Office recovery and restoration Dot.Com. light heartedly.
We are waiting for your follow of「Instagram, Twitter, Facebook」.
From price quotation to construction work completion, our company directly manage and do all of construction work by ourselves.
So, we are supplying
「reasonable construction work as much as possible with high quality and better service」
to our customers.
Of course, please do not hesitate to compare our quotation with other companies’, as we welcome competitive quotations.
「Which construction contractor should we request?」
「How much is the approximate construction cost?」and so on,
besides above also, we are waiting for your questions.
On office・shop or store・warehouse relocation, original state recovery and restoration work, reform work(interior decorative construction), and so on, please give us your inquiry light heartedly in the first place.
～～～～～～～～～～～～～～～～～～～～～～IKEBUKURO～～～～～～～～～～～～～～～～～～～～～～～～
★If you look for interior decorative construction contractor at Ikebukuro, it is Office original state recovery and restoration Dot.Com.★
★If you also look for original state recovery and restoration work in Tokyo, it is Office original state recovery and restoration Dot.Com.★
Address: 〒171-00144th floor, Musashiya No.3 Building62-10, 2-chome, Ikebukuro, Toshima ward, Tokyo>Free phone: 0120-978-226
～～～～～～～～～～～～～～INTERIOR DECORATIVE CONTRACTOR～～～～～～～～～～～～～～～～<
Hello, everyone！ We here are Office recovery and restoration Dot.Com. website.
Our company has an office at Ikebukuro as the midpoint, and in all over Kanto district, we are mainly taking charge of「Interior decorative construction」 「Recovery and restoration construction」for you.
Stepladder, foothold stand, movable interior foot stage and so on, there are various footholds used at interior construction sites. This time, we are explaining seif-moving high altitude work vehicle which we do not see very often? As for executing interior decorative construction at high ceiling sites are not often after all. So, above-mentioned stepladder, foothold stand, movable interior foot stage and so on are enough for almost all the cases. However, when it comes to factories and the like, as their ceilings may be high, high altitude work vehicle or high altitude work platform may be used sometimes.
This time, we think we are explaining them with those construction site pictures.
Firstly, as for the definition of high altitude work vehicle, it is pointed to be a self-moving machine which has work floor to be able to be lifted up equal or higher than 2 meters, and by using power of lifting up and down device, motion device and so on. Among high altitude work vehicle, it is necessary to have special education course evidence of lifting up and using equal to or higher than 2 meters and less than 10 meter high work vehicle. While, it is necessary to have skill training course evidence of lifting up andusing higher than 10 meter work vehicle. Only a day may be possible to get special education course evidence. In the case of skill training course, even if part of the training program is remitted to attend, it seems to require two days at least.
For those who have the evidence of high altitude work vehicle driving of special education, you should be careful it does not mean to be able to be a work chief person.
If there are other plural persons who are able to be work chief working together, those who have special education evidence only is permitted. But, if there is not any person to be work chief, or there are only one or two those persons, it may be advisable to attend that lecture and have the evidence too.
Different from high altitude work vehicle, concerning high altitude work platform, it is not necessary to get any evidence or license for using one.
It is also possible to drive truck type high altitude work vehicle on the public road. However, it comes to be necessary to get suitable driving license according to loading capacity and vehicle total weight. So, when driving on the public road, getting semi-medium driving license or getting medium size driving license may come to be necessary.
When it comes to be in interior decorative construction industry, it seems that using foothold stand and interior decorative work use foothold are enough at work sites in almost all the cases. However, as similar to high altitude work platform, we have briefly touched on high altitude work vehicle this time too. In order to use both safely, it seems to be important to use them properly (As for high altitude work vehicle, getting its driving license is also necessary.).
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Let alone ceiling, wall repair and remedial work, painting work,
shop or store new opening or renewal, please be sure to talk with Office recovery
and restoration Dot.Com. light heartedly.
We are waiting for your follow of「Instagram, Twitter, Facebook」.
From price quotation up to construction work completion,
our company is directly managing and doing construction work by ourselves.
So, we are supplying「reasonable construction work as much as possible, and high quality, better work service」to our customers.
Of course, please do not hesitate to compare our quotation with other companies, as we welcome your competitive quotations.
「Which construction contractor should we request?」
「How much is the approximate construction cost?」and so on, besides above also, we are waiting for your questions.
On office・shop or store・warehouse relocation, recovery and restoration work, reform work(interior decorative construction), and so on, please give us your inquiry light heartedly in the first place.
～～～～～～～～～～～～～～～～～～～～～～～IKEBUKURO～～～～～～～～～～～～～～～～～～～～～～～
★If you look for interior decorative work contractor at Ikebukuro, it is Office recovery and restoration Dot.Com.★
★If you also look for recovery and restoration work in Tokyo, it is Office recovery and restoration Dot.Com.★
Address: 〒171-0014
4th floor, Musashiya No.3 Building
62-10, 2-chome, Ikebukuro, Toshima ward, Tokyo
Free phone: 0120-978-226
～～～～～～～～～～～INTERIORDECORATIVE CONSTRUCTION WORK CONTRACTOR～～～～～～～～～～
Hello, everyone！ We here are Office recovery and restoration Dot.Com. website.
Our company is taking charge of「Interior decorative construction」「Recovery and restoration construction」and so on at Ikebukuro as midpoint, and in all over Kanto district for you.
Concerning only a part of tenant interior decorative construction, seemingly, chances are that its construction sometimes cannot be executed in the daytime business hours too. In that case, as we have no other choice but to execute construction at night to the midnight, so lighting is used at the site.
It seems that lighting device called floodlight or working light is often used which is in the following picture.
There are various lighting devices such as from flashlight size, construction site used big sized type, suitable to snowing or so outdoor use, lightened up the pinpoint at a certain place which can be put in and fixed type, and so on. All of these are called working light or floodlight.
It seems that we may consider their usage and so on are the same. However, probably the biggest different point between working light and floodlight is the difference of corresponding voltage. Mainly used for interior decorative construction is floodlight.
Floodlight can be used by household electricity, while working light can be used by connecting battery. As to working light, it may be probably easy to understand to use these lights by correlating with the image of connecting car or generator battery, right?
If used by the voltage which does not correspond to the lighting, it may cause its defect or accident. So, we advise you not to do that.
What is often used at interior decorative construction sites seems to be a lighting of 360°degree omni-direction column type. If you would like to partly light up hand or so, it may be good to properly use one with clip by matching the necessary situation.
『Office renewal・shop or store redecoration』 interior decorative construction・recovery and restoration work and so on, if you are worried, please give us your inquiry light heartedly in the first place.
We are waiting for your relative follow too.
From price quotation up to construction work completion, our company is directly managing and doing construction work by ourselves. We are supplying 「reasonable construction work as much as possible, and high quality, better work service」to our customers.
～～～～～～～～～～～～～～～～～～～～～～～IKEBUKURO～～～～～～～～～～～～～～～～～～～～～～～
★If you look for interior decorative work contractor at Ikebukuro, it is Office recovery and restoration Dot.Com.★
★If you also look for recovery and restoration work in Tokyo, it is Office recovery and restoration Dot.Com.★
Address: 〒171-0014
4th floor, Musashiya No.3 Building
62-10, 2-chome, Ikebukuro, Toshima ward, Tokyo
Free phone: 0120-978-226
～～～～～～～～～～～INTERIORDECORATIVE CONSTRUCTION WORK CONTRACTOR～～～～～～～～～
Hello, everyone！ We here are Office recovery and restoration Dot.Com. website.
Our company is taking charge of「Interior decorative construction work」「Recovery and restoration construction work」mainly at Ikebukuro, and in all over Kanto district for you.
We are introducing small screw like thing also called bis (probably, it is not English) this time. As there are a lot of its kind, we firstly introduce two kinds. These are almost the same. However, the head part is different whether the head down part has lines or not, and whether the head toward part has smooth curved line or angle.
Above picture, do you know which is trumpet shaped small screw? We will answer later.
Besides, suitable raw material is different too. There is only a little visual difference, what is suitable to hard material is the right ones. The right one is suitable for calcium silicate board, plywood board, and so on. Trumpet shaped screw is used for gypsum board, so it is often used at the construction site too. It can be probably said that good craft workers can precisely select among them according to the purpose. Suitable length of small screw differs according to board thickness too.
The answer of above picture is the left ones. As the left one is trumpet shaped small screw, it is called so.
Right ones look like ▽, and its feature is with lines lengthwise.
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Let alone ceiling or wall repair construction, painting work, shop or store new opening, renewal, please be sure to consult Office recovery and restoration Dot.Com. light heartedly.
We are waiting for your follow on「Instagram, Twitter, Facebook」
From price quotation up to construction work completion, our company is directly managing and doing construction work by ourselves. Our aim is supplying 「reasonable construction work as much as possible, and high quality, better work service」to our customers.
Of course, please do not hesitate to compare our quotation with other companies’. We do not mind at all if you compare with other competitive quotations too.
「Which construction contractor should we request?」「How much is approximate construction price?」and so on, besides these too, we are waiting for your questions.
On office・shop or store・warehouse relocation, recovery and restoration construction work, reform work(interior decorative work), and so on, please give us your inquiry light heartedly in the first place.
～～～～～～～～～～～～～～～～～～～～～～～～IKEBUKURO～～～～～～～～～～～～～～～～～～～～～～～
★If you look for interior decorative work contractor at Ikebukuro, it is Office recovery and restoration Dot.Com.★
★If you also look for recovery and restoration work in Tokyo, it is Office recovery and restoration Dot.Com.★
Address: 〒171-0014
4th floor, Musashiya No.3 Building
62-10, 2-chome, Ikebukuro, Toshima ward, Tokyo
Free phone: 0120-978-226
～～～～～～～～～INTERIORDECORATIVE CONSTRUCTION WORK CONTRACTOR～～～～～～～～～～～
Hello, everyone！ We here are Office recovery and restoration Dot.Com. website.
Our company is taking charge of「Interior decorative construction work」「Recovery and restoration construction work」mainly at Ikebukuro, and in all over Kanto district for you.
This time, we are introducing tools for cutting-off LGS,
High speed cutter(cutting LGS.)
At first, starting from a machine tool for cutting LGS.
「High speed cutter」
The above picture is shown from behind. If shown from the front, it is like the following picture.
High speed cutting machine (quoted from Makita Corporation official home page)
A round shaped big blade rotates at high speed, cuts LGS which was put between, and adjusts the length.
As the construction situation in Makita Corporation website is very clear, we introduce it to you. Please look at this.
Incidentally, when cutting LGS, considerable sparks may be emitted. So, we set up「spark cover」in the front, and cure by placing bottom grey colored incombustible material called「sputter sheet」. When doing site work operation, we put water into bucket, and prepare fire extinguisher.
Spark cover (quoted from Might Industry Co.Ltd., official website)
M shaped bar cutter(Quoted from Minoru Industry Co.Ltd., official website)
It is a tool for cutting M bar(=general term of S bar・W bar, ceiling joist) .
(Sorry! We do not touch on M bar in detail this time.)
As there are a lot of useful things too such as the head is rotatable and so on.
Besides, for interior decorative industry workers, electrical facility industry workers and the like, chances are that they are also used for installing air-conditioner, electricity and so on.
C shaped steel cutter (quoted from Minoru Industry Co.Ltd., official website)
It is a tool for cutting C shaped steel(C channel・C shape steel(ceiling joist receiver)) .
(Sorry! We do not touch on C shaped steel in detail this time.)
There are various product kinds. The blade of the product which we introduced as above has been made to meet C shaped steel, so it can be cut off only once.
That is all for our explanation of「Tools which are active in interior decorative construction for cutting (for LGS use)」as above.
Besides above-mentioned tools, it seems that there are other construction sites where different tools are used too.
As to what we do not usually see such as base part construction, tools like these are used, aren’t they?
In the near future, we are planning to introduce「Tools which are active in interior decorative construction for cutting (for board use」.
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Let alone office・shop or store ceiling or wall repair work, painting work, new opening, renewal, and so on, please talk with Office recovery and restoration Dot.Com light heartedly by all means.
We are waiting for your follow of「Instagram, Twitter, Facebook」.
From price quotation up to construction work completion, our company is directly managing and doing construction work by ourselves. Our aim is supplying 「reasonable construction work as much as possible, and high quality, better work service」to our customers.
Of course, please do not hesitate to compare our quotation with other companies’. We welcome your comparing competitive quotations.
「How to execute this construction work? Or, how much is your approximate price?」and so on, we are waiting for your question・inquiry.
On office・shop or store・warehouse relocation, recovery and restoration construction work, reform work(interior decorative work), and so on, please give us your inquiry light heartedly in the first place.
～～～～～～～～～～～～～～～～～～～～IKEBUKURO～～～～～～～～～～～～～～～～～～～～
★If you look for interior decorative work contractor at Ikebukuro, Tokyo, it is Office recovery and restoration Dot.Com.★
★If you also look for recovery and restoration work, it is Office recovery and restoration Dot.Com.★
Address: 〒171-0014
4th floor, Musashiya No.3 Building
62-10, 2-chome, Ikebukuro, Toshima ward, Tokyo
Free phone: 0120-978-226
～～～～～～～～～～INTERIORDECORATIVE CONSTRUCTION WORK CONTRACTOR～～～～～～～～～～～
