大家好！ 我们这里是办公室修复原状Dot.Com.网站。
我们公司在东京都丰岛区池袋设置着办公室，在关东全域范围内正在从事施行室内装饰最后施工・修复原状施工为主的室内装饰施工业界者，为客户服务。
今天，我们将要介绍和说明一下，建筑施工办法之一的『设置地板地面施工作业办法』。
设置地板地面施工作业办法是，把建筑物的基础在地盘上面直接设置来构筑的办法，即好久一直使用的传统做法。
最近，由于这个又简朴又有效果的性质，现在正在再次引人注目。
・成本效率很高：
可以大幅度减少基础工事的成本。
没有必要挖掘基础，只需要把地盘弄平就好。
因此，可以控制建筑费用。
・工事期间比较短：
因为不需要挖掘作业，可以节约基础工事时间。
想要缩短建筑物的建设计划时间的场合，特别地合适。
・耐震性能很高：
因为地盘和建筑物之间没有间隙，地震等的摇晃容易直接传到。
由此，提高耐震性能。
・环保：
因为挖掘作业少，对地盘和周围环境的影响很少。
废材的发生量也减少。
1.地盘的调查
在建筑物的宅基、我们调查地盘。
我们把握地盘的强度和地陷等后，采取恰当的对策。
2.地盘的平直
要是地盘不平直的话，我们做弄平作业。
此结果，我们确保基础的稳定性。
3.基础的设置
在地盘上面，我们配置混泥土大块和或钢骨等，来形成基础。
这个起的作用是分散建筑物的重量。
4.建筑物的建设
基础做完后，我们来建设建筑物。
我们设置壁和柱子，建筑物的建设就完成了。
设置地板地面作业办法是，因为其成本效率很高，工期比较短，就是最近再次正在引人注目的建筑作业办法。
它对耐震性能也有优势，为人所知对环境也考虑好的办法。
不过，根据地盘的状态，也许有做作业不合适的场合，事先的地盘调查是不可缺少的。
如果各位也要依赖做建筑物之际，就研究一下设置地板地面作业办法，怎么样？
我们到此为止说明了设置地板地面作业办法的优点和其施工办法。
最后
如果各位要查询或者依赖办公室的修复原状工事等室内装饰工事的话，
请随意地给我们联系！
～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～
关于办公楼・房产租户（店铺）的修复原状工事，入居工事，搬迁，撤退，
翻新工事等，如果各位在考虑要依赖这些施工的话，请务必跟我们公司随意地来联系！
各位也可以从SNS（社交网络服务）来查询。请一起观看。
从报价到施工完毕，我们公司全部都是亲自安排施工工事，
我们的目标是给客户供应「尽可能便宜的、质量高的好产品」。
◆如果各位找丰岛区池袋的室内装饰工事・修复原状工事，
请到办公室修复原状Dot.Com.◆
邮编：〒171-0014
地址: 东京都丰岛区池袋2-62-10 武藏屋第三楼四层
免费电话: 0120-978-226
Hello, everyone！ We here are Office recovery and restoration Dot.Com. website.
Our company office is at Ikebukuro, Toshima ward, Tokyo, and in all over Kanto district, we are an interior decorative construction work contractor, mainly taking charge of Interior decorative finishing construction・Original state recovery and restoration work for you.
Today, we are explaining『Floor placement work method』as a construction method.
Floor placement work method is, directly placing building base on the ground and assembling and working, a traditional work method which has been used from long time ago.
Recently, because of its simple and effective character, it is attracting significant notices again.
・The cost efficiency is high:
It can greatly reduce the cost related to base work.
As it is not necessary to excavate the base, it only requires to flatten the ground, it can save the cost of construction.
・Construction period is short：
As excavation work is not necessary, the base work time can be saved.
If you would like to shorten building construction schedule, it is particularly suitable.
・Earthquake resisting property is high:
As there is no gap between the base and the building, shakings such
as earthquake and so on directly spread to the building easily.
Therefore, earthquake resisting property is enhanced.
・Environmental friendly:
As the excavation work is little, the influence to the base and surrounding environment is going to be small.
In addition, occurring of waste material is also diminished.
1.Investigating the ground
We investigate the ground at the building site.
We grasp the ground strength, depression and so on, and work out a suitable measurement.
2.Flattening the ground
If the ground is not flat, we do flattening work operation.
Through doing this, we secure the base stability.
3.Installing base
We install concrete block, steel and so on the ground, and form the base.
It plays a role of scattering the building weight.
4.Building construction
After completing the base, we construct the building.
We install the wall and pillar, then the building construction is finished.
As for floor placement work method, the cost efficiency is high, and the construction period is short.
Therefore, it is also known as a construction work method in the spotlight again recently.
It also excels in earthquake resisting property, so it is known as a work method which is well environmentally considered too.
However, depending on the ground state, as there are sometimes unsuitable grounds too, the ground investigation in advance is indispensable.
If you are requesting to construct a building, how about considering floor placement work method?
We so far explained the merits of floor placement work and its construction method.
On your interior decorative work such as office original state recovery and restoration work.
please give us your inquiry light heartedly!
～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～
On office building・tenant(shop or store)
original state recovery and restoration work, moving in work,
relocarion, withdrawal, reform work and so on, if you are considering to request,
please be sure to contact our company light heartedly!
It is also possible to give us your inquiry from SNS social media.
Please be sure to see it together.
From price quotation up to construction work completion,
our company is directly managing and doing construction work by ourselves.
Our aim is, supplying
「reasonable construction work as much as possible, and high quality, better work service」
to our customers.
◆If you look for interior decorative work・original state recovery and restoration
work at Ikebukuro, Toshima ward, please look for Office recovery and restoration Dot.Com.◆
Address: 〒171-0014
4th floor, Musashiya No.3 Building
62-10, 2-chome, Ikebukuro, Toshima ward, Tokyo
Free phone: 0120-978-226
大家好！ 我们这里是办公室修复原状Dot.Com.网站。
我们公司在东京都丰岛区池袋设置着办公室，在关东全域范围内正在从事施行室内装饰施工・修复原状施工为主的室内装饰施工业界者，为客户服务。
在本博客，我们一边解说办公室的各种各样题目。一边在共享施工事例。
各位读者 为了又可以开心地看此博客文章，又容易理解它们，针对今后也许要考虑依赖室内装饰工事的各位，我们也想要提供有用的消息。
对于办公室室内装饰的任何事情，欢迎和我们相谈！
我们此次将要介绍和说明的内容是，「石膏衬板施工办法」的一部分。
关于使用石膏衬板用胶水的石膏板的粘贴
此次，我们将要介绍的并不是施工事例或者施工的样子，就是实际的施工办法。
Tiger（虎牌）石膏衬板用胶水：从吉野石膏公司的网页引用
在室内装饰工事，石膏板是广泛使用的素材之一。
也其中，石膏衬板用胶水具有优质的粘贴力和耐久性能，所以，对石膏板的粘贴有好效果。
使用石膏衬板用胶水是，不只实现又合理又均一的最后加工结果，而且可以提高耐久性能。
在本文章，我们要详细介绍和说明使用石膏衬板用胶水的石膏板粘贴办法和其优点。
使用石膏衬板用胶水时的施工照片在上面
我们要来说明一下石膏衬板用胶水的特性和其用途
石膏衬板用胶水是，粘贴木材、胶合板、石膏板等的素材时，使用的胶水。
它有强力的胶贴力和耐久性能，适合于石膏板的粘贴。
1.地基的准备
把壁面弄得干净，整齐平直状态。按照需要，做地基处理。
2.石膏衬板用胶水的涂布
在石膏板的背面，把石膏衬板用胶水均一地涂布。
使用适量的石膏衬板用胶水，努力做没有非均匀性地涂布吧。
3.粘贴石膏板
紧贴涂布过的石膏衬板用胶水的一面和壁面后，来粘贴石膏板。
压好合适的力量，来确保均一地胶贴。
4.干燥和最后加工处理
粘贴后，等一段时间 把石膏衬板用胶水到完全干燥状态。
然后，要来做连接处的处理和表面的最后加工。
连接处的处理是，在粘贴石膏板时，就是处理石膏板的结合部分、破裂、窝等处理的一种工程。
石膏板并不是一张大的板，而是凑合必要的尺寸来粘贴复数的板，来形成壁面和天棚。
为了埋入其结合部分和间隙来实现又均一又美丽最后加工结果，就做连接处的处理。
连接处的处理是，在石膏衬板施工办法，把石膏板的结合部位端正地做最后加工的重要工程。
在下面，我们来说明一下一般的连接处处理顺序。
1.连接处用胶带的粘贴
在石膏板的结合部位，贴上连接处胶带。
连接处胶带有，防止破裂和加强结合部位的作用。
在整个结合部位，平均地贴吧。
粘贴胶带时，很重要的是一边把结合部位好好压，一边做作业。
2.连接处复合物（胶水）的涂布
贴上连接处胶带后，使用连接处复合物（胶水）来埋入胶带。
连接处复合物，起的作用是把石膏板的表面整齐得润滑，把结合部位弄得一体化。
使用较框的刷毛和海绵状物，均匀地涂布复合物吧。
3.复合物的干燥
等到连接处复合物充分干好。
具体干燥时间，看着产品说明的指示来确认吧。
如果干燥时间比较短的话，加热或者使用干燥机，也可以缩短时间。
4.研磨
为了把干燥好的连接处复合物，润和地做到最后加工结果，
使用砂纸和砂子海绵状物来研磨。
去掉不要的凹凸和粗糙表面，把结合部位整齐得均一状态。
研磨后，使用吸尘机和布来清扫壁面吧。
以上是，一般的连接处的处理顺序。
不过，具体的顺序和材料的使用办法，根据现场状况和施工和条件也许不同。
我们推荐，和专业的室内装饰业界者来商谈，而依赖做个合适的连接处处理。
粘贴石膏板时的照片
・坚固的粘贴力量
石膏衬板用胶水有优势的张贴力量，把石膏板在壁面好好固定。
・提高耐久性能
由石膏衬板用胶水的粘贴，对耐久性能有优优势，在长时间防止石膏板的剥离和浮上。
・高效率的施工
使用石膏衬板用胶水后，可以又迅速又顺利地做石膏板的粘贴作业。
・恰当的地基处理很重要。好好地做壁面的清扫和弄得平直化吧。
・石膏衬板用胶水的恰当的涂布和均一的涂布很重要。
随着产品指示来做作业，努力均匀地粘贴吧。
・根据必要，我们推荐各位要拿到专家的建议和指导。
使用石膏衬板用胶水的石膏板而粘贴是，在室内装饰工事 为了追求高效率和耐久性能是很重要的办法。
由很强的胶贴力和耐久性能，石膏衬板用胶水防止石膏板会发生的剥离和浮上，保持长期美丽的最后加工结果。
一边正确做法地和恰当地施工，一边使用石膏衬板用胶水来粘贴石膏板吧。
其结果，就能实现对耐久性能有优越的室内装饰最后加工吧。
如果各位对室内装饰最后加工工事感兴趣或要依赖，请随意地给我们查询。
就符合客户的要求和预算，我们要来提个最合适的计划和施工。
使用石膏衬板工事办法而修复原状工事的施工事例在这里
～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～
关于办公楼・房产租户（店铺）的修复原状工事，入居工事，搬迁，
撤退，翻新工事等，如果各位在考虑要依赖这些施工的话，
请务必跟我们公司随意地来联系！
各位也可以从SNS（社交网络服务）来查询。请一起观看
从报价到施工完毕，我们公司全部都是亲自安排施工工事，
我们的目标是给客户供应「尽可能便宜的、质量高的好产品」。
◆如果各位找丰岛区池袋的室内装饰工事・修复原状工事，
请到办公室修复原状Dot.Com.◆
邮编：〒171-0014
地址: 东京都丰岛区池袋2-62-10 武藏屋第三楼四层
免费电话: 0120-978-226
안녕하세요.사무실회복닷컴입니다.
저희 회사는 도쿄도 도시마구이케부쿠로에 사무실을 두고 관동일대에서 「인테리어공사」「원상회복공사」를 운영하고 있습니다.
오늘은 건축공법의 하나, 『오끼유카공법(置床工法)』에 대하여 소개해드리겠습니다.
오끼유카공법(置床工法)은 건물의 기초를 지반위에 직접 놓고 구축하는 방법으로 옛날로부터 사용되어 온 전통적인 수법입니다.
최근에는 이 심플하고 효과적인 성질로부터 다시 주목을 받고 있습니다.
1. 비용효률이 높다：기초공사에 드는 비용을 크게 줄일수 있습니다.
기초를 파고 만드는 필요가 없이 지반을 평탄하게 하는것만으로 마치기 때문에 건축에 드는 비용을 줄일수 있습니다.
2. 공기가 짧다：뚫고 파는 작업이 없기 때문에 기초공사의 시간을 절약할수 있습니다.
건물의 건설일정을 단축하고 싶은 경우에는 특히 적합합니다.
3. 내진성이 높다：지반과 건물사이에 틈새가 없기 때문에 지진등의 흔들림이 건물에 직접 전달되어 알기 쉽습니다.
4. 친환경이다：뚫고 파는 작업이 적기 때문에 지반이랑 주위환경에의 영향이 적어집니다.
그리고 폐재의 발생도 삭감됩니다.
1. 지반조사
건물의 부지에서 지반조사를 진행합니다.
지반의 강도랑 침하등을 파악하고 적절한 대책을 세웁니다.
2.지반의 균등
지반이 불균하면 균등작업을 진행합니다.
이 작업에 의해 기초의 안정성을 확보합니다.
3.기초의 설치
지반위에 콘크리트블록이랑 철골등을 배치하여 기초를 형성합니다.
건물의 중량을 분산시키는 역할을 합니다.
4.건물의 가설
기초가 완성하면 건물의 가설이 진행됩니다.
벽이랑 기둥을 설치하고 건물이 완성합니다.
오끼유카공법은 비용효룰이 높고 공기가 짧은 것으로
최근 또다시 주목받는 건축공법입니다.
다만,지반의 상태에 따라서는 적합하지 않는 경우도 있기 때문에,
사전에 지반조사가 필요합니다.
이상이 오끼유카공법(置床工法)이란? 장점과 시공방법에 대한 설명이였습니다.
사무실의 원상회복공사등 인테리어공사에 관한 것이라면
저희 회사로 부담없이 문의해주십시오.
보드랑 합판이라는것은 건물을 건축할때 반드시 사용하는 재료합니다.
또 시설이랑 빌딩등 건물에 따라 규약이 있기 때문에 사용하는 보드랑 합판은 결정되어 있습니다.
전에 보드에 관한 다른 블로그도 올린것이 있습니다.
같이 읽어 주시면 좋겠습니다.
GL본드를 사용한 석고브드 붙임 (일본어)
링크：
～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～
오피스빌딩・테넌트(가게)의 원상복구공사,입주공사,이전,철퇴,리모델링등을 고려하신다면
저희 회사 사무실회복닷컴으로 문의 주세요.
으로부터도 문의할수 있습니다. 클릭하여 봐주시면 고맙습니다.
저희 회사는 견적으로부터 시공완료까지 모두 당사에서 실시함으로
고객님께「조금이라도 싸게, 그리고 좋은 품질과 좋은것을」제공하기 위하여 노력하고 있습니다.
◆도시마구의 인테리어업체・원상회복공사라면 사무실회복닷컴 ◆
〒171-0014
도쿄도 토시마구 이케부쿠로 2-62-10무사시야 제3빌딩 4층
TEL : 0120-978-226
Hello, everyone！ We here are Office recovery and restoration Dot.Com. website.
Our company office is at Ikebukuro, Toshima ward, Tokyo, and in all over Kanto district, we are an interior decorative construction work contractor, mainly taking charge of Interior decorative finishing construction・Original state recovery and restoration construction for you.
In this website blog, we are explaining various themes of office, while we are sharing construction site examples.
In order for you as a reader to read these articles with pleasure, we would like to supply useful pieces of information to those who are considering to request interior decorative work in the future.
Please take counsel on any kinds of office interior work with us.
The content which we are introducing and explaining this time is a part of「GL construction method」.
On sticking on gypsum board by using GL bond
This time, what we are explaining is not construction site example or construction state, but an actual construction method.
Tiger brand GL bond:： Quoted from Yoshino Gypsum Co.,Ltd. website
Gypsum board is one of widely used materials for interior decorative constriction.
Among them, GL bond has excellent adhesive strength and durability, so, it is effective to stick on gypsum board.
Sticking on gypsum board by using GL bond is, not only able to realize efficient and even finishing result, but also able to enhance durability.
In this article, we are explaining the method of sticking on gypsum bord by using GL bond gypsum board and its merits in detail.
GLボンドを使った施工の写真がこちら
The above is a construction picture using GL bond.
We are explaining the feature of GL bond and its usage.
GL bond is an adhesive used for sticking materials such as wood, plywood, gypsum board and so on. It has powerful adhesive strength and durability, so, it is suitable for sticking on gypsum board.
1 Preparing backing
Cleaning the wall surface, and neaten even state. If necessary, carrying on backing treatment.
2 Applying GL bond
Applying GL bond on the back side of gypsum board evenly.
Please be sure to use suitable GL bond amount, and applying it with uniformity as much as possible.
3 Sticking on gypsum board
Sticking applied GL bond surface and wall surface firmly, and sticking to gypsum board.
Then, pressing with suitable power, and securing even adhesiveness.
4 Drying and finishing treatment
After sticking on it, waiting until drying GL bond completely.
After that, doing joint treatment and finishing on the surface.
Joint treatment is, a process of treating crack, dent and so on at the gypsum board junction part in gypsum board sticking.
Gypsum board is not used as a big board, but by sticking plural board together to match the necessary size, the wall surface and ceiling are formed.
In order to fill the joint part and gap, to realize uniform and beautiful finishing, joint treatment is duly done.
Joint treatment is, an important process for neatly finishing the joint part of gypsum board in GL work method.
We are explaining the procedure of general joint treatment as follows:
1.Sticking joint tape
Sticking joint tape at the joint part of gypsum board.
Joint tape, plays a role of preventing crack, and enforcing joint part.
Let us stick the tape evenly at all of the joint part.
When sticking the tape, it is important to do this work operation by pressing the joint part firmly at the same time.
2.Applying joint compound (bond)
After sticking joint tape, filling the tape by using joint compound(bond). Joint compound, plays a role of neatening the surface of gypsum board, and unify the joint part. Let us use wide brush and sponge, and applying it to spread compound evenly.
3.Drying compound
Waiting for joint compound to be fully dried.
Let us confirm the drying time according to the product instruction.
If you want to shorten the drying time, it is possible to heat it or to use drying devise to shorten the time.
4.Sanding(polishing)
In order to smoothen the dried joint compound finishing, using sanding with sandpaper or sand sponge.
Getting rid of unnecessary 凹凸and surface roughness, neatening the joint part to even state.
After sanding, let us clean the wall surface with vacuum machine and cloth.
The above is a general procedure of joint treatment.
However, as to the concrete procedure and material usage, they may differ, depending on the site situation and construction condition sometimes.
We propose you to take counsel with a professional interior decorative contractor, and request to do a suitable joint treatment.
The picture to stick on gypsum board
・Firm adhesive strength
GL bond has excellent adhesive strength, and it firmly fixes gypsum board on the wall surface.
・Enhancing durability
Gluing with GL bond is excellent in durability, so, it protects long-term peeling and floating up of gypsum board.
・Efficient construction
By using GL bond, sticking on gypsum board work operation can be done quicky and smoothly.
・A suitable backing treatment is important. Let us clean up the wall surface and make it even politely.
・A suitable applying amount of GL bond and evenly applying are necessary. Let us carry on work operation according to the instruction, and strive to stick it on the board evenly.
If necessary, we recommend you to get an expert advice and guidance.
Sticking on gypsum board by using GL bond is, an important method on pursuing efficiency and durability in interior decorative work.
Because of the strong adhesiveness and durability, it prevents peeling and floating up of gypsum board, so, it keeps long-term beautiful finishing result.
While doing right method and suitable construction, let us stick on gypsum board by using GL bond. As the result, it may realize interior decorative finishing which excels in durability.
Your request・inquiry from here.
If you are interested or have request in interior decorative finishing work, please give us your inquiry light heartedly.
We will propose the most suitable planning and construction to match your requirement and budget.
An original state recovery and restoration construction site example using GL work method is here
～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～
If you are considering to request office building・tenant(shop or store) original state recovery and restoration work, moving in work, relocation, removal, reform work, and so on, please be sure to contact our company light heartedly!
You can also give us your inquiry from SNS social media. Please see them together by all means!
From price quotation up to construction work completion, our company is directly managing and doing construction work by ourselves.
Our aim is, supplying
「reasonable construction work as much as possible, and high quality, better work service」to our customers.
◆If you look for interior decorative work・original state recovery and restoration work at Ikebukuro, please just look for Office recovery and restoration Dot.Com.◆
Address: 〒171-0014
4th floor, Musashiya No.3 Building
62-10, 2-chome, Ikebukuro, Toshima ward, Tokyo
Free phone: 0120-978-226
大家好！ 我们这里是办公室修复原状Dot.Com.网站。
我们公司在东京都丰岛区池袋设置着办公室，在关东全部地域范围内，正在从事 室内装饰最后施工・修复原状施工 的施工行业单位，为客户做工和服务。
在此网站博客，我们一边在解说办公室的各种各样的题目，一边在共享施工事例。此博客的读者，为了乐意地读文章，我们想办法尽量在提供容易了解的，并且 对今后会打算依赖室内装饰施工的各位有用的消息。
办公室室内装饰施工的任何事情，欢迎各位和我们商谈。
此次，我们将要介绍、说明的内容是，办公室的办公自动化地板地面（地板地面施工）的一部分。
此次是，
「底衬物（地基处理）的施工办法」
从FUKUBI化学产业公司底衬物的网站网页引用
※画像链路
对于办公自动化的地板地面，地基处理是很重要的作业工程之一。
底衬物是，在地板地面的下面敷设的材料。
它起的作用是防止发生地板地面的伤痕和声音，而提高地板地面的耐久性能。
因为它在各种各样设施作为地板地面材料起好作用，所以，并不只在办公室的办公自动化地板地面，而且在老人用住宅和设施、教育设施等也可以利用。
我们在下面要说明一下底衬物的施工办法。
敷设地板地面之前，需要处理地板地面的地基处理。
首先确认地板地面是平坦，也没有脏污或障碍物。
也确认充分干燥后，请解除尘土。
按照需要，在地板地面，铺一下沙石或沙子等的敷设材料后，整齐得平均。
把底衬物在地板地物面敷设。
底衬的敷设办法有全铺、半铺等的办法。
全铺是，把底衬物到处都塞进的办法。
半铺是，把底衬物从边缘几厘米内侧塞进的办法。
全铺是，把整个的地板地面可以到处都能平均地保持，不过，材料的使用量狠多。
半铺是，可以减少材料使用量，但是，却是有底衬物容易移动的缺点。
塞进完了底衬物后，按照需要，使用胶水来固定。
使用胶水的场合，按照施工办法，在地板地面均匀地涂布后，把底衬物从上面压上。
施工后，请使用撸用棒来放出空气。胶水干了以后，可以敷设办公自动化用地板地面。
※施工最后加工材料时的注意
施工FUKUVI化学产业公司的底衬物后，养护24小时以上之后，请施工最后加工材料。
请不要把地板地面最后加工材料和FUKUVI化学产业公司底衬物的连接处一起堆起来。
如果把垫子地板地面、乙烯基塑料地面地板片叠合切开之际，摆一下敷设板等，请不要把FUKUVI底衬物一起切断。
其它，请遵循各个最后加工材料的施工办法来施工。
总结
底衬物的施工办法，按照地板地面的形式和施工行业者，会有不同的场合。
重要的事宜是，施工行业者应该一边拥有合适的技术，一边施行正确的施工。
并且，施工之前，必须好好确认敷设的计划和地基处理等重要的要点。
此次，我们就底衬物施工办法的说明到此为止。
最后
办公室室内装饰施工之事的话，请随意地和我们来商谈！
～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～
关于办公楼・房产租户（店铺）的修复原状施工，入居施工，搬迁，撤退，整建整修施工等，如果各位在考虑要依赖这些施工的话，请务必跟我们公司随意地来联系！
各位也可以从SNS（社交网络服务）来查询
从报价到施工完毕，我们公司全部都是亲自安排施工工事，我们的目标是给客户供应「尽可能便宜的、质量高的好产品」。
★如果各位在找丰岛区池袋的室内装饰施工・修复原状施工，找办公室修复原状Dot. Com.★
邮编：〒171-0014
地址: 东京都丰岛区池袋2-62-10 武藏屋第三楼四层
免费电话: 0120-978-226
大家好！ 我们这里是办公室修复原状Dot.Com.网站。
我们公司在东京都丰岛区池袋设置着办公室，在关东全域范围内正在从事施行室内装饰施工・修复原状施工为主的室内装饰施工业界单位，为客户服务。
此次，我们将要介绍和说明一下 在埼玉县内的一个施工现场情况。就是某一家房产租户新的室内装饰施工。
房产租户的室内装饰地基工事是，为了把店铺和办公室等的最后加工后的空间，弄得很棒，就是很重要工程。充分做地基工事的结果，就能实现美丽的最后加工后的状态和很长期间的耐久性能。
首先，我们来说明一下地基施工工事的目的。地基工事是，把壁、地板地面、天棚等的表面，弄平的作业。地基工事的主要目的如下:
地基的调整・修补: 把地基的表面整齐得均一后，在施工壁纸・所谓的装饰用织物等最后加工材料时，成为不容易出现非均匀性或凹凸。由此，就能实现美丽的最后加工成果。
耐久性能的提高：地基工事时，我们来做适当的补强。由此作业，就提高室内装饰材料的强度和耐久性能。结果，可以减少很长时间使用之际会引起的劣化和损坏。
稳定性能：地基工事是，确保壁和天棚稳定性的重要工程。做个合适的地基工事后，可以被坚固地固定石膏板等，而确保它的安全性能。
钢骨的设置：地基工事的最初阶段是，轨道的设置。把轨道在合适的位置切断，而固定正确的位置。一边使用激光测定器来确认水平和垂直，一边坚固地安装轨道。
我们安装墙筋。对着轨道垂直地设置着的是墙筋。
安装补强材料：按照必要，我们安装补强材料。补强材料是，在开口部位等来安装。提高结构的强度和稳定性能。把补强材料配置合适的位置，使用螺丝钉等来固定。
安装板材：轻量型钢地基的最后工程是，安装板材。以一般的板材，有石膏板。把板材来切断合适的尺寸后，在轻量型钢地基使用螺丝钉来安装。
调整和修补地基：施工板材后，我们确认地基的平直性。按照需要，我们来调整或修补。为了补好凹凸和/或裂痕，我们使用合适的修补材料。使用修补材料，就确保施工面的均一性，而提高最后加工后的质量。
转移到最后加工工程：施工完轻量型钢地基后，我们转到下个工程。在最后加工工程，我们涂装、粘贴壁纸、施工地板地面等的室内装饰最后加工。因为轻量型钢地基是，对稳定性能和耐久性能有优势，所以顺利地进行最后加工材料的施工。此结果，可以实现美丽的室内装饰空间。
在上面，我们说明了，施工轻量型钢地基的基本流程。轻量型钢地基是，适合于被要求耐久性能和稳定性能的租户房产的室内装饰素材。为了施行此施工，需要专门知识和经验。因此，我们推荐各位要依赖有丰富经验的内行施工业界者。
～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～
关于办公楼・房产租户（店铺）的修复原状施工，入居施工，搬迁，撤退，整建整修施工等，如果各位在考虑要依赖这些施工的话，请务必跟我们公司随意地来联系！
各位也可以从SNS（社交网络服务）来查询
从报价到施工完毕，我们公司全部都是亲自安排施工工事，我们的目标是给客户供应「尽可能便宜的、质量高的好产品」。
★如果各位在找丰岛区池袋的室内装饰施工・修复原状施工，找办公室修复原状Dot. Com.★
邮编：〒171-0014
地址: 东京都丰岛区池袋2-62-10 武藏屋第三楼四层
免费电话: 0120-978-226
Hello, everyone！ We here are Office recovery and restoration Dot.Com. website.
Our company office is based at Ikebukuro, Toshima ward, Tokyo, and in all over Kanto district, we are an interior decorative construction work contractor, taking charge of Interior decorative finishing construction・Original state recovery and restoration construction, mainly for you.
This time, we are introducing and explaining a construction work example in Saitama prefecture. It is about a certain new interior decorative construction at a tenant.
Interior decoration backing work of tenant is, a very important process for finishing it nicely. By fully executing backing work, beautiful finishing and long-term durability are realized.
We are explaining the purpose of backing work firstly. Backing work is, a work operation of flattening the surface of wall, floor, ceiling and so on. The main purposes of ground work are as follows:
Adjusting・repair and mending backing: By making uniform backing surface, it becomes difficult to occur irregularity or 凹凸 of wall paper・so-called decorative cloth and other finishing materials. As the result, beautiful finishing can be realized.
Enhancing durability: Proper enforcement is done for backing work. As the result, interior decorative material strength and durability are enhanced, so the long-term used deterioration and damage are reduced.
Stability: Backing work is an important process to secure the stability of wall and ceiling. By doing proper backing work, gypsum board and so on are firmly fixed, so the safety is secured.
Installing steel : The first step of backing work is, the installation of runner. By cutting runner to match the place of wall and ceiling, fixing it at the precise place. By using laser measuring instrument and so on, fixing runner firmly, while confirming horizontality and verticality.
We install stud. What is placed vertically against runner is stud.
Installing reinforcing material: We install reinforcing material if required. The reinforcing material is installed at the opening or so, and it enhances the structural strength and stability. We arrange reinforcing material at the proper place, and fix it with screw and so on.
Installing board: The final process of light steel backing is, installing board. As a usual board, there is gypsum board. We cut it into the proper size, and fix it at the light steel backing with screw.
Adjusting and reinforcing backing: After executing board, we check the evenness of backing. If necessary, we adjust and reinforce it. In order to neaten凹凸 and crack, we use the proper repairing and mending materials. By using the materials, we secure the constructed surface uniformity, and enhance the finishing quality.
Moving on to the finishing process: After completing the construction of light steel backing, we move to the next process. At the finishing process, we execute interior decorative finishing work such as painting, sticking wall paper, flooring and so on. As light steel backing excels in stability and durability, finishing material work is carried out smoothly, so it is possible to realize beautiful interior decorative space.
The above is the basic construction work process of light steel backing. Light steel backing is, a suitable backing material as tenant interior decorative material which is required for durability and stability. As the special knowledge and experience are required for its construction, as for the construction, we advise you to request a fully experienced contractor.
～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～
If you are considering office building・tenant(shop or store) original state recovery and restoration work, moving in work, relocation, removal, reform construction, and so on, please be sure to contact our company light heartedly!
You can also give us your inquiry from SNS social media. Please see them together!
From price quotation up to construction work completion, our company is directly managing and doing construction work by ourselves. Our aim is, supplying「reasonable construction work as much as possible, and high quality, better work service」to our customers.
★If you look for interior decorative work contractor at Ikebukuro, it is Office recovery and restoration Dot.Com.★
Address: 〒171-0014
4th floor, Musashiya No.3 Building
62-10, 2-chome, Ikebukuro, Toshima ward, Tokyo
Free phone: 0120-978-226～
안녕하세요.사무실회복닷컴입니다.
도쿄도 도시마구 이케부쿠로에 사무실을 두고 관동일대에서「원상회복공사」「인테리어공사」를 운영하고 있는 인테리어회사입니다.
사무실의 인테리어공사의 일이라면 저희회사로 부담없이 상담주십시오.
오늘은 오피스빌딩의 사무실내장공사
【천장의 개수공사】 시공예를 소개해드리겠습니다.
이번은 부분적인 개수공사입니다.
오래된 낡은 천장을 뜯어내고 새로운 천장으로 합니다.
내구성이랑 내진성을 검토하거나 할때 추천드립니다. 부분적인 공사이기 때문에 전체리노베이션에 비하여 비용이랑 공기가 많이 억제할수 있습니다.
개수공사에 대한 전의 다른 블로그(일본어)도 참조해 주십시오.
시공내용
공사이름：사무실천장개수공사
공사현장：도쿄도 츄오우구 니혼바시혼쵸
공사기간：약1주일간
공사내용：이번에는 주로 경량철골공사와 석고보드공사입니다.
천장의 경량철골기초보수를 진행하고 기존의 경량철골밑에 석고보드를 붙이고,
또한 새로 시공한 천장의 경량철골에 석고보드를 붙입니다.
천장에 점검구를 설치할 필요가 있기 때문에 구멍을 냅니다.
석고보드기초재위에 소라톤을 붙여갑니다.
천장의 미키리재를 시공하여 외부모서리각도부분도 보강을 하고
개구곳에 점검구를 설치합니다.
※미키리재/見切り材란 마무리재가 바뀌는 부분 (경계부분) 에 사용되는 마무리재입니다. 예를 들면 바닥이랑 벽의 마무리재의 끝부분이랑 끝과 끝을 연결시킬때 시공되는 마무리재를 가르킵니다.
그럼, 시공중의 사진을 소개해드립니다.
천장경량철골공사 이미지
천장에 석고보드를 붙이고 개구부부의 시공
천장개구부붕에 점검구를 설치한후
밑으로 내리온 벽이외는 거의 다 시공함
이상이 시공경과의 사진입니다.
사무실의 개수공사는 부담없이 문의주십시오.
마지막으로
원상회복공사를 잊지 않았습니까?
이전이랑 퇴거할때는 「사무실을 빌렸을때의 원래의 상태로 되돌릴 」필요가 있습니다.
기술자의 수배・현장의 일괄관리를 진행하기에 시간과 중간비용을 크게 줄일수 있습니다.
이전・퇴거의 계획과 맞추어서 원상복구공사도 저희 회사에 상담해주세요.
～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～
오피스빌딩・테넌트(가게)의 원상복구공사,입주공사,이전,철퇴,리모델링등을 고려하신다면
저희 회사 사무실회복닷컴으로 문의 주세요.
으로부터도 문의할수 있습니다. 클릭하여 봐주시면 고맙습니다.
저희 회사는 견적으로부터 시공완료까지 모두 당사에서 실시함으로
고객님께「조금이라도 싸게, 그리고 좋은 품질과 좋은것을」제공하기 위하여 노력하고 있습니다.
◆도시마구의 인테리어업체・원상회복공사라면 사무실회복닷컴 ◆
〒171-0014
도쿄도 토시마구 이케부쿠로 2-62-10무사시야 제3빌딩 4층
TEL : 0120-978-226
大家好！ 我们这里是办公室修复原状Dot.Com.网站。
我们公司以池袋为中心，在关东全域范围内正在从事「施行室内装饰施工」「修复原状施工」为主，为客户服务。
房产租户一部分的话，白天的营业时间，也许不可以施工。那时侯，因为我们只好从夜间到深夜来施工时，我们就使用照明。
看来，我们常常使用下一张照片里的叫做泛光灯和作业灯。
从手电筒的大小开始，到在建筑现场使用的大型类型、适合于下雪时的外边使用的、为了照明精确地针尖来夹紧和固定的类型等，有各种各样的照明器具。那些叫做作业灯或者泛光灯。
它们的用途等应该可以认为是一样。不过，作业灯和泛光灯的区别大概是，对应电压不同是很大的。室内装饰施工时主要使用的是泛光灯。
可以使用家庭电源的是泛光灯，连接电池而使用的是作业灯。，作业灯是，关联到连接汽车和发电机的电池而使用概念的话，也许比较好记忆吧。如果使用不支持的电压来使用的话，会造成故障和事故的原因。因此，不要那样使用吧！
在室内装饰施工现场使用的、大概是照明360度全方向的圆柱形是很多。如果要部分照明手等的话，使用带着别针的等，根据需要的状态、适当地来使用就好吧。
关于『办公室更改・店铺更改装饰』、室内装饰施工・修复原状施工 等，如果各位在为难的话，首先，请跟我们随意地来查询。
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
当然包括天棚或壁的修补施工、涂装工事、店铺的新开业和更新之事，
请务必到 修复原状Dot.Com.乐意来商谈！
我们也等待着各位「Instagram、推特、Facebook」的跟随。
从报价到施工完毕，我们公司全部都是亲自安排施工工事，
我们正在给客户供应「尽可能便宜的、质量高的好产品」。
「应该依赖哪一家施工业界单位好？」「施工费用大概需要多少钱？」等，
也除了上记以外，我们正在等待各位提来的有关问题。
办公室・店铺・仓库的搬迁、修复原状施工、整建整修施工（室内装饰施工）等，
首先请乐意给我们有关查询！
～～～～～～～～～～～～～～～～～～～池袋～～～～～～～～～～～～～～～～～～～～
★如果各位想找池袋的室内装饰施工单位，就是 办公室修复原状Dot. Com.★
★如果各位也想找东京的修复原状施工，就是 办公室修复原状Dot. Com.★
邮编：〒171-0014
地址:东京都丰岛区池袋2-62-10 武藏屋第三楼四层
免费电话: 0120-978-226
～～～～～～～～～～～～～～室内装饰施工业界单位～～～～～～～～～～～～～～～～
