Hello, everyone！ We here are Office recovery and restoration Dot.Com. website.
We have been setting up our company office at Ikebukuro, Toshima ward, Tokyo, and are a work contractor taking charge of interior decorative work in all over Japan.
This time, we are introducing and explaining the necessary tools when carrying out interior decorative work.
A tool which we frequently use in the interior decorative work is【tacker】.
tacker
Tacker is a tool to fix network things such as cloth and wall paper to wooden materials and so on. Please take it as a big stapler. In order to use it, by loading a staple and press it in, then you can fix the materials. As there are various kinds of it, we will choose one respectively according to the usage.
This time, as it is the introduction as a tool, we are explaining the tackers of various usages.
According to the kinds of tacker as a tool, things to be fixed vary.
The places and scenes to be used as the interior decorative work are various such as:
and so on. It is used in various places.
This image is the one which is temporarily fixing rock wool sound absorbing board to the ceiling in the construction site.
The above image is a scene of construction using air tacker.
There are several kinds of tacker.
In the above picture, it is a construction of using air tacker.
There are several kinds of tacker.
What are frequently seen in the interior decorative work are:
「Gun tacker」is a tacker of striking and fastening a needle by the same manner as stapler by pressing the handle.
We use it when striking and fastening thin materials.
In the interior decorative work site, we mainly use it for curing it and so on.
by electric power：Quoted from MONOTAROU website
「Electric tacker」is a tacker of striking and fastening the needle by electric power.
Unlike gun tacker, we do not need to put effort. So, it is suitable to continuous work operation.
It is lighter than air tacker. So, it is very convenient to strike and fasten the needle only by pressing a button.
There is a plug-in type too, but a recharging type is becoming mainly used.
We use the either type respectively according to the using time and so on.
３．Air tacker
「Air tacker」is a type of tacker to strike and fasten the needle by connecting with compressor by using strong power.
There are two kinds of it, one for high pressure type and another for normal pressure type. The products whose various functions were installed are popular too.
Pulling its trigger, and it will make a soundof ‘Pushuu’, then driving a needle into the object by air pressure. Installed are popular too.
Pulling the trigger, then the sound like ‘ Pushuu’ will come.
And we drive a needle into the object by air pressure.
So, the needle can be easily and strongly driven in.
But, if the air pressure of air compressor is strong, when driving it, the needle trace will be caved in. So, it needs to be adjusted.
It is also mainly used for the finishing driving-in of interior decorative material in the construction site, and heat insulating material fastening and so on. As it is strong, it can be also used for re-sticking thick leather products.
４．Floor tacker
Quoted from Amazon Japan website
「Floor tacker」is, according to the original name, it is a special exclusive tacker for driving needle into floor.
By using air compressor, we drive コ letter like needle into the object.
It is used for sticking wooden materials and so on to the floor.
In the case of「The floor is swelled」and/or「The floor is cracked」, when driving a needle into floor, this tacker is more recommendable to use this tacker than air tacker.
On the needle to use for tacker
It is the special needle for「tacker」.
This specialized needle is called stapler use needle, which is close to stapler like needle.
There are a few kinds of needles of these uses, such as コ shape・U shape・T shape. According to the electric tacker kinds, drivable needle kinds are different.
There are two kinds of needles which are mainly used in the interior decorative work.
They are「J line needle」and「MA line needle」staples.
In the normal case, we use J line needle. We use it for the construction of sticking the sheet, double layer sticking from above the groundwork board, and so on.
As we can also use J line needle by driving electric tacker・air taker, it is regarded as precious.
Compared with J line needle, MA line one has become thicker and harder.
It is used for special cases such as hard boards and so on.
When we use it, we have to use air taker only.
If we should use electric tacker, it becomes non-standard.
As just our short talk, however even if a professional interior decorative worker drive about 15 places into the object by using a tacker, the needle scar and others are not distinctive.
If those who are amateur, drive a lot of needles in the object without practice, then scar will be rather distinctive. So, please request the professional people to do it for the interior decorative work by all means.
This time, we briefly introduced and explained tacker and staple in the interior decorative work.
Tacker is one of the very important tools for the interior decorative work and the construction work operation sites.
According to the purpose of its usage, we respectively use various tackers and the materials.
As various taker makers are manufacturing them, please try to use their usability and so on variously.
According to the kinds, the corresponding needles and so on are different. So, let’s confirm it sufficiently and select one in advance! Please enjoy your DIY(=do-it-yourself) by using your favorite tacker in the interior decorative work.
※Please understand that we will execute construction in Japan only.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If you are considering to request us office building・tenant(shop or store）original state recovery and restoration work, moving in work, relocation, removal, reform work, and so on, please contact our company light heartedly by all means!
You can also give us your relative inquiry from SNS social media. Please be sure to see it together.
From price quotation up to construction work completion, our company is directly managing and doing construction work by ourselves. Our aim is, to supply「reasonable construction work as much as possible, with high quality, better work service」to our customers.
◆If you look for interior decorative work・Returning to original state and restoration work in Ikebukuro,Toshima ward, please visit Office restoration Dot.Com.◆
Address
〒171-0014
4th floor, Musashiya No.3 Building, 62-10, 2-chome, Ikebukuro, Toshima ward, Tokyo
Free phone: 0120-978-226
Japanese Blog
안녕하세요.사무실회복닷컴입니다.
저희 회사는 도쿄도 도시마구이케부쿠로에 사무실을 두고 관동일대에서 인테리어공사・원상회복공사를 운영하고 있습니다.
사무실의 건설이랑 리모델링에 있어서 바닥공사는 아주 중요한 역할을 합니다.
바닥은 사무실내부의 기반이고 종업원의 쾌적성이랑 작업효율, 그리고 사무실의 분위기에 큰 영향을 가져다 주기 때문입니다.
여기서는 사무실의 바닥공사에 대하여 간단하게 설명하겠습니다.
사무실의 바닥에는 다양한 재료가 사용됩니다.
목재바닥,카펫,비닐타일,콘크리트등이 일반적입니다.
바닥재의 선택은 사무실의 용도랑 디자인,내구성등을 고려하여 진행됩니다.
목재바닥은 따뜻함이 있고, 카펫은 방음성이 높고, 비닐타일은 유지보수가 쉬운등 각자의 특성을 살린 선택이 중요합니다.
바닥재를 선택할때는 여러가지 요소를 고려할 필요가 있기 때문에
아래와 같이 바닥재의 선택에 있어서 중요한 요소를 요약하였습니다.
사무실용도나 디자인콘셉트에 맞추어서 바닥재를 선택합니다.
예를 들면 깨끗한 인상이 필요하면 밝은색상의 바닥재 또는 광택이 있는 재료
를 선택하는것이 적절합니다.
바닥재의 내구성과 유지보수성은 중요한 요소입니다.
사무실에서는 많은 사람이 이용하기 때문에 내마모성이랑 더러움에 강한 바닥재를 선택하는것이 중요합니다.또 유지보수가 쉽고 청소하기 쉬운 바닥재를 선택하는것으로 청결한 환경을 유지하기 쉽게 됩니다.
바닥의 쾌적성과 건강성도 중요한 요소입니다.
발의 부담을 경감시키는 쿠션성이 있는 바닥재랑 바닥난방과 잘 어울리는 재료를 선택하는것으로 직원의 직장환경의 쾌적성을 향상시킬수 있습니다.
또 알레르기를 유발하는 먼지와 세균의 번식을 억제하는 물질을 선택하여 건강한 환경을 제공할수 있습니다.
바닥재의 선택에는 시공코스트와 내용연수의 균형도 고려할 필요가 있습니다.
저가격의 바닥재를 선택하는 경우에도 장기적인 내구성이나 유지보수비용을 고려하는것이 중요합니다.
고품질의 바닥재는 초기투자가 많아지는 경우가 있지만, 내구성이랑 미관을 유지하기 위한 효과적인 선택으로 됩니다.
바닥공사에서는 바닥의 기초처리도 중요한 공정입니다.
바닥의 기초가 불충분하면 바닥재가 벗겨지기 쉽고 편안함과 내구성이 훼손되는 경우가 있습니다.
적절한 기초처리를 진행하지 않으면 바닥전체의 안전성이나 내구성에 영향을 가져다 주기에 찬찬한 작업이 필요됩니다.
아래에 바닥재처리의 상세한것을 소개하겠습니다.
바닥의 기초처리는 먼저 상태를 확인하는것부터 시작됩니다.
불균일,균열 또는 고르지 않은 표면등과 같은 문제가 있으면 그러한것을 수리합니다.
오목하게 파인 부분은 모르타르나 셀프레벨링 컴파운드를 사용하여 평활한 표면으로 수복하여 균열된 부분은 적절한 보수재로 보수합니다.
바닥의 기초는 먼지랑 더러움이 부착되어 있는 경우가 있습니다.
시공전에 충분한 청소를 진행하는것으로 바닥의 기초표면을 깨끗하게 하고 또 시공후의 접착력을 향상시킵니다. 청소에는 브러시,걸레,청소기등을 사용하여 먼지와 더러움을 깨끗하게 제거합니다.
바닥의 기초가 보수되고 청소되면 기초처리재가 시공됩니다.
기초처리재는 바닥의 표면을 균일화하고 바닥재의 접착성을 증가시키는 역할을 합니다.
일반적으로 프라이머(기초조정제) プレスタイルメントコンパウンド??등의 기초처리재가 사용됩니다.
이러한 재료는 바닥의 표면을 매끄럽게 하고 흡수성을 제어하여 바닥재의 접착성을 향상시킵니다.
기초처리재를 시공한후는 적절한 건조시간과 경화시간을 확보할 필요가 있습니다.
기초처리재의 건조시간이랑 경화시간은 재료의 종류랑 기후조건에 따라 다르지만,시공전에 제조회사의 지시에 따라 적절한 시간을 확보하는것이 중요합니다.
기초처리가 끝나면 최종적인 점검을 진행합니다.
바닥의 표면이 균일하고 매끄럽고 기초처리재가 적절하게 경화되고 건조되였는가를 확인합니다.
이상의 공정을 찬찬하게 실시하는것으로 바닥의 기초처리를 효과적으로 진행할수 있습니다.
바닥공사는 전문적인 기술과 경험이 필요한 작업입니다.
바닥재의 정확한 치수측정 및 적절한 접착제의 선택등 상세하고 찬찬한 작업이 불가결합니다.
시공기술의 향상에 의해 바닥의 내구성이나 외형의 아름다움이 확보됩니다.
그 이유는 아래와 같습니다.
【정확한 치수측정】
바닥재를 정확하게 측정하고 적절하게 배치하는것은 바닥전체의 미관이랑 균형을 유지하는데 중요합니다.
시공자는 전문적인 측정기술을 가지고 바닥의 모양이랑 치수에 맞춰서 재료를 끊는 능력이 요구됩니다.
【적절한 접착재의 선정】
바닥재를 적절하게 고정하기 위해서는 적절한 접착재를 선정하는것이 중요합니다.
시공자는 바닥재의 종류랑 바닥기초의 상황을 고려하여 적절한 접착제를 선택합니다.
또 접착제의 적절한 양과 도포방법도 시공기술의 일환입니다.
【깔끔한 마무리】
바닥의 마무리에는 시공자의 기술이 직접 영향합니다.
깔끔한 마무리는 바닥전체의 미관을 높일뿐만 아니라 내구성이랑 유지보수성도 향상시킵니다.
시공자는 찬찬한 작업을 유의하고 바닥을 매끄럽게 마무리하기 위한 숙련된 기술을 가지고 있습니다.
【재료의 적절한 취급】
바닥공사에는 여러 종류의 재료가 사용됩니다.
시공자는 각자의 재료의 특성을 이해하고 적절한 취급방법을 알아야 합니다.
예를 들면 목재바닥이랑 타일등의 바닥재는 습기랑 온도의 영향을 받기 쉽기 때문에 적절한 보관이랑 취급이 필요합니다.
【문제해결능력】
시공중에 문제가 발생한 경우, 그것을 해결하는 능력도 시공기술의 일부입니다.
시공자는 신속하게 대처하고 최상의 해결책을 찾기 위해 경험과 지식을 활용합니다.
이상과 같이 바닥공사의 시공기술은 바닥의 품질이랑 내구성,미관을 확보하는데 있어서 불가결합니다.
경험이 풍부한 시공업이 높은 기술과 꼼꼼한 작업을 진행하는것으로 품질이 높은 바닥을 실현할수 있습니다.
사무실바닥공사는 종업원의 쾌적성이나 작업효율을 향상시키는 중요한 요소입니다.
적절하게 시공된 바닥은 걸을때의 쾌적함이랑 발자국소리기 조용하고 청결감도 제공합니다.
쾌적한 바닥의 환경은 직원의 동기부여랑 생산성향상에 연결됩니다.
사무실의 바닥공사는 쾌적한 직장환경을 실현하기 위한 중요한 요소입니다.
적절한 바닥재의 선택과 시공기술의 향상에 의해 직원의 만족도랑 생산성을 향상시킬수 있습니다.
쾌적한 사무실환경을 실현하기 위하여 바닥공사의 중요성을 이해하고 적절한 대책을 진행합시다.
저희 회사에서는 경험이 풍부한 전문가가 높은 기술을 구시하여 고품질의 바닥공사를 제공합니다.
손님의 요구에 맞추어서 최적의 바닥재재료를 선택하고 시공기술을 개선하여 아름다운 사무실환경의 실현을 지원합니다.
～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～
오피스빌딩・테넌트(가게)의 원상복구공사,입주공사,이전,철퇴,리모델링등을 고려하신다면
저희 회사 사무실회복닷컴으로 문의 주세요.
으로부터도 문의할수 있습니다. 클릭하여 봐주시면 고맙습니다.
저희 회사는 견적으로부터 시공완료까지 모두 당사에서 실시함으로
고객님께「조금이라도 싸게, 그리고 좋은 품질과 좋은것을」제공하기 위하여 노력하고 있습니다.
◆도시마구의 인테리어업체・원상회복공사라면 사무실회복닷컴 ◆
〒171-0014
도쿄도 토시마구 이케부쿠로 2-62-10무사시야 제3빌딩 4층
TEL : 0120-978-226
Hello, everyone！ We here are Office recovery and restoration Dot.Com. website, a personnel in charge.
We have been setting up our company office at Ikebukuro, Toshima ward, Tokyo, and we are an interior decorative work contractor, mainly taking charge of construction of Interior decorative finishing work・original state recovery and restoration work in all over Japan.
This time, as one of Terminology series after a certain time, by going back to the basic, we are introducing and explaining『light gage steel』once again.
I briefly do the roundup in my own way, then I am going to introduce it to you based on the construction pictures.
As this article is easy to read through, please browse it light heartedly.
Light gauge steel (LGS) is a construction material made by cold forming of thin steel.
It is widely used as a structural material of architecture.
While its weight is light, it has high strength too.
So, it is variously used in the places such as housings, commercial facilities, industrial use buildings, and so on.
The silver-colored material installed in the ceiling and wall is LGS.
The silver-colored material installed in the ceiling and wall is LGS.
「Light weight」-ness also in its term name
Compared with the conventional steel frame, it is very light.
As its transportation and construction are easy to do, it is used in a lot of construction sites.
※Conversation only here confidentially:
It is lighter than other conventional steel frames.
But, when we are asked if it is possible even for a female also can easily hold it, we will answer that, although it is relatively lighter than other construction materials.
But, whether even a female feels that she 「can hold it easily or not」, it depends on the size and length of the steel frame, and each person’s physical strength too.
LGS pillars and beams change the weights according to the cross-section area and length.
Generally, the weight of a piece of LGS steel frame varies from about a few kilograms to a few tens of kilograms.
However, it is also important in the lifting up pose and holding way.
If it is small sized, it may be easy to hold it.
But, if it is long and thick, the weight balance is sometimes difficult to keep it.
Chances are that it may be difficult only for one person to move it.
As the safety side is considered, moving it by plural persons and using appropriate equipment are recommended.
So, in the case of only one person will move or make landing it, let’s be careful!
While its weight is light, as it has very high strength too, it is suitable for a building where earthquake resistant property and durability are required.
If we briefly explain tensile strength of steel used for LGS, it seems that「Even if we hang the steel of every 1 square millimeter cross-section area like thin needle of it(=structural steel) on the steel frame of the weight about 40～55 kilograms, it will not be broken.」.
Steel material is resistant to corrosion and insect damage.
So, it will exhibit its stable performance for a long time.
As for its durability, it is usually said that the duration of life is 50～100 years.
In the case of appropriate designing and protection are applied, it is possible to use it within this range without any problems.
However, if the problems of rust and/or corrosion go fast, depending on its maintenance, the durability of life may be shortened sometimes too.
For your reference, in the case of using it as a building interior decorative groundwork, as the groundwork of a ceiling and wall, compared with wooden material, it is lighter and has more strength too.
Therefore, it is recommendable to use it, as it has a high long-term durability.
As abovementioned, LGS is light, and has high strength as well.
As you can choose one from various cross-section shape type, such as C type, L type, and so on, it is a material whose freedom of designing is very high.
As you can take column interval wider than wooden material, you can secure a large space. An open and few pillar design is possible.
As it is also easy to process it in the work site, and fine adjustment and complex shape corresponding can be easy to do too, it is suitable for curvilinear design and special interior decoration too.
In addition, as it is possible to flexibly correspond to extension, reconstruction, and renovation, it can be easily correspond to change the design in the future too.
As it is used in various buildings such as housings, commercial facilities, factories, and so on, LGS is an excellent construction material which will realize free design for wide usages.
As the reason of its high earthquake resistant property, you can also use it in earthquake frequently striking areas with ease too.
And, also as for fire breakout, it has a certain fireproofing property.
The reason why the earthquake resistant property is high is, as its name suggests, LGS is light. So, as it can control the weight of entire building, when earthquake strikes, the burden of earthquake shaking becomes small.
In addition, as steel frame has strength and tenderness together too, it also flexibly corresponds to earthquake power.
So, the damage and injury can be controlled to minimum.
We are introducing and explaining a part of construction site example.
LGS is being widely applied to the following architecture.
Housing apartment
LGS is being used as a structural material of the living space such as in single-family dwellings.
It ts light and has highly strength, multiple dwelling, and so on.
As it is light and has high strength, it is the most suitable to the building where earthquake resistant property and durability are required.
It is the work of a tenant in a commercial facility.
It is the state of making the groundwork of curved wall.
By using R processed runner (rounding corner processing) , it is possible to make a built-in gypsum board wall which has designability.
LGS is a very excellent construction material which is light, and has high strength and durability.
The freedom of designing is high, so, it is being widely used for various buildings, such as housings, commercial facilities, and so on.
As it is also excellent in earthquake resistant property and fireproofing property, it can secure safety, more and more demands are being expected continuously.
Our company is taking charge of a lot of interior decorative work and original state recovery and restoration work by using LGS.
If you are interested in these, please give us your inquiry from the following「inquiry」light heartedly!
※Please understand that we will execute construction in Japan only.
If you are considering to request us office building・tenant(shop or store）
original state recovery and restoration work, moving in work, relocation,
removal, renovation work, and so on,
please contact our company light heartedly by all means!
You can also give us your relative inquiry from SNS social media.
Please be sure to see it together.
From price quotation up to construction work completion,
our company is directly managing and doing construction work by ourselves.
Our aim is, to supply
「reasonable construction work as much as possible,
with high quality, better work service」to our customers.
If you look for interior decorative work・
Returning to original state and restoration work in Ikebukuro,
Toshima ward, please visit Office restoration Dot.Com.
〒171-0014
4th floor, Musashiya No.3 Building, 62-10, 2-chome,
Ikebukuro, Toshima ward, Tokyo
Free phone: ０１２０－９７８－２２６
