Hello, everyone！ We here are Office recovery and restoration Dot.Com. website.
Our company office is at Ikebukuro, Toshima ward, Tokyo, and in all over Kanto district, we are an interior decorative construction work contractor, mainly taking charge of Interior decorative finishing construction・Original state recovery and restoration construction for you.
In this website blog, we are explaining various themes of office, while we are sharing construction site examples.
In order for you as a reader to read these articles with pleasure, we would like to supply useful pieces of information to those who are considering to request interior decorative work in the future.
Please take counsel on any kinds of office interior work with us.
The content which we are introducing and explaining this time is a part of「GL construction method」.
On sticking on gypsum board by using GL bond
This time, what we are explaining is not construction site example or construction state, but an actual construction method.
Tiger brand GL bond:： Quoted from Yoshino Gypsum Co.,Ltd. website
Gypsum board is one of widely used materials for interior decorative constriction.
Among them, GL bond has excellent adhesive strength and durability, so, it is effective to stick on gypsum board.
Sticking on gypsum board by using GL bond is, not only able to realize efficient and even finishing result, but also able to enhance durability.
In this article, we are explaining the method of sticking on gypsum bord by using GL bond gypsum board and its merits in detail.
GLボンドを使った施工の写真がこちら
The above is a construction picture using GL bond.
We are explaining the feature of GL bond and its usage.
GL bond is an adhesive used for sticking materials such as wood, plywood, gypsum board and so on. It has powerful adhesive strength and durability, so, it is suitable for sticking on gypsum board.
1 Preparing backing
Cleaning the wall surface, and neaten even state. If necessary, carrying on backing treatment.
2 Applying GL bond
Applying GL bond on the back side of gypsum board evenly.
Please be sure to use suitable GL bond amount, and applying it with uniformity as much as possible.
3 Sticking on gypsum board
Sticking applied GL bond surface and wall surface firmly, and sticking to gypsum board.
Then, pressing with suitable power, and securing even adhesiveness.
4 Drying and finishing treatment
After sticking on it, waiting until drying GL bond completely.
After that, doing joint treatment and finishing on the surface.
Joint treatment is, a process of treating crack, dent and so on at the gypsum board junction part in gypsum board sticking.
Gypsum board is not used as a big board, but by sticking plural board together to match the necessary size, the wall surface and ceiling are formed.
In order to fill the joint part and gap, to realize uniform and beautiful finishing, joint treatment is duly done.
Joint treatment is, an important process for neatly finishing the joint part of gypsum board in GL work method.
We are explaining the procedure of general joint treatment as follows:
1.Sticking joint tape
Sticking joint tape at the joint part of gypsum board.
Joint tape, plays a role of preventing crack, and enforcing joint part.
Let us stick the tape evenly at all of the joint part.
When sticking the tape, it is important to do this work operation by pressing the joint part firmly at the same time.
2.Applying joint compound (bond)
After sticking joint tape, filling the tape by using joint compound(bond). Joint compound, plays a role of neatening the surface of gypsum board, and unify the joint part. Let us use wide brush and sponge, and applying it to spread compound evenly.
3.Drying compound
Waiting for joint compound to be fully dried.
Let us confirm the drying time according to the product instruction.
If you want to shorten the drying time, it is possible to heat it or to use drying devise to shorten the time.
4.Sanding(polishing)
In order to smoothen the dried joint compound finishing, using sanding with sandpaper or sand sponge.
Getting rid of unnecessary 凹凸and surface roughness, neatening the joint part to even state.
After sanding, let us clean the wall surface with vacuum machine and cloth.
The above is a general procedure of joint treatment.
However, as to the concrete procedure and material usage, they may differ, depending on the site situation and construction condition sometimes.
We propose you to take counsel with a professional interior decorative contractor, and request to do a suitable joint treatment.
The picture to stick on gypsum board
・Firm adhesive strength
GL bond has excellent adhesive strength, and it firmly fixes gypsum board on the wall surface.
・Enhancing durability
Gluing with GL bond is excellent in durability, so, it protects long-term peeling and floating up of gypsum board.
・Efficient construction
By using GL bond, sticking on gypsum board work operation can be done quicky and smoothly.
・A suitable backing treatment is important. Let us clean up the wall surface and make it even politely.
・A suitable applying amount of GL bond and evenly applying are necessary. Let us carry on work operation according to the instruction, and strive to stick it on the board evenly.
If necessary, we recommend you to get an expert advice and guidance.
Sticking on gypsum board by using GL bond is, an important method on pursuing efficiency and durability in interior decorative work.
Because of the strong adhesiveness and durability, it prevents peeling and floating up of gypsum board, so, it keeps long-term beautiful finishing result.
While doing right method and suitable construction, let us stick on gypsum board by using GL bond. As the result, it may realize interior decorative finishing which excels in durability.
Your request・inquiry from here.
If you are interested or have request in interior decorative finishing work, please give us your inquiry light heartedly.
We will propose the most suitable planning and construction to match your requirement and budget.
An original state recovery and restoration construction site example using GL work method is here
～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～
If you are considering to request office building・tenant(shop or store) original state recovery and restoration work, moving in work, relocation, removal, reform work, and so on, please be sure to contact our company light heartedly!
You can also give us your inquiry from SNS social media. Please see them together by all means!
From price quotation up to construction work completion, our company is directly managing and doing construction work by ourselves.
Our aim is, supplying
「reasonable construction work as much as possible, and high quality, better work service」to our customers.
◆If you look for interior decorative work・original state recovery and restoration work at Ikebukuro, please just look for Office recovery and restoration Dot.Com.◆
Address: 〒171-0014
4th floor, Musashiya No.3 Building
62-10, 2-chome, Ikebukuro, Toshima ward, Tokyo
Free phone: 0120-978-226
大家好！ 我们这里是办公室修复原状Dot.Com.网站。
我们公司在东京都丰岛区池袋设置着办公室，在关东全部地域范围内，正在从事 室内装饰最后施工・修复原状施工 的施工行业单位，为客户做工和服务。
在此网站博客，我们一边在解说办公室的各种各样的题目，一边在共享施工事例。此博客的读者，为了乐意地读文章，我们想办法尽量在提供容易了解的，并且 对今后会打算依赖室内装饰施工的各位有用的消息。
办公室室内装饰施工的任何事情，欢迎各位和我们商谈。
此次，我们将要介绍、说明的内容是，办公室的办公自动化地板地面（地板地面施工）的一部分。
此次是，
「底衬物（地基处理）的施工办法」
从FUKUBI化学产业公司底衬物的网站网页引用
※画像链路
对于办公自动化的地板地面，地基处理是很重要的作业工程之一。
底衬物是，在地板地面的下面敷设的材料。
它起的作用是防止发生地板地面的伤痕和声音，而提高地板地面的耐久性能。
因为它在各种各样设施作为地板地面材料起好作用，所以，并不只在办公室的办公自动化地板地面，而且在老人用住宅和设施、教育设施等也可以利用。
我们在下面要说明一下底衬物的施工办法。
敷设地板地面之前，需要处理地板地面的地基处理。
首先确认地板地面是平坦，也没有脏污或障碍物。
也确认充分干燥后，请解除尘土。
按照需要，在地板地面，铺一下沙石或沙子等的敷设材料后，整齐得平均。
把底衬物在地板地物面敷设。
底衬的敷设办法有全铺、半铺等的办法。
全铺是，把底衬物到处都塞进的办法。
半铺是，把底衬物从边缘几厘米内侧塞进的办法。
全铺是，把整个的地板地面可以到处都能平均地保持，不过，材料的使用量狠多。
半铺是，可以减少材料使用量，但是，却是有底衬物容易移动的缺点。
塞进完了底衬物后，按照需要，使用胶水来固定。
使用胶水的场合，按照施工办法，在地板地面均匀地涂布后，把底衬物从上面压上。
施工后，请使用撸用棒来放出空气。胶水干了以后，可以敷设办公自动化用地板地面。
※施工最后加工材料时的注意
施工FUKUVI化学产业公司的底衬物后，养护24小时以上之后，请施工最后加工材料。
请不要把地板地面最后加工材料和FUKUVI化学产业公司底衬物的连接处一起堆起来。
如果把垫子地板地面、乙烯基塑料地面地板片叠合切开之际，摆一下敷设板等，请不要把FUKUVI底衬物一起切断。
其它，请遵循各个最后加工材料的施工办法来施工。
总结
底衬物的施工办法，按照地板地面的形式和施工行业者，会有不同的场合。
重要的事宜是，施工行业者应该一边拥有合适的技术，一边施行正确的施工。
并且，施工之前，必须好好确认敷设的计划和地基处理等重要的要点。
此次，我们就底衬物施工办法的说明到此为止。
最后
办公室室内装饰施工之事的话，请随意地和我们来商谈！
～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～
关于办公楼・房产租户（店铺）的修复原状施工，入居施工，搬迁，撤退，整建整修施工等，如果各位在考虑要依赖这些施工的话，请务必跟我们公司随意地来联系！
各位也可以从SNS（社交网络服务）来查询
从报价到施工完毕，我们公司全部都是亲自安排施工工事，我们的目标是给客户供应「尽可能便宜的、质量高的好产品」。
★如果各位在找丰岛区池袋的室内装饰施工・修复原状施工，找办公室修复原状Dot. Com.★
邮编：〒171-0014
地址: 东京都丰岛区池袋2-62-10 武藏屋第三楼四层
免费电话: 0120-978-226
大家好！ 我们这里是办公室修复原状Dot.Com.网站。
我们公司在东京都丰岛区池袋设置着办公室，在关东全域范围内正在从事施行室内装饰施工・修复原状施工为主的室内装饰施工业界单位，为客户服务。
此次，我们将要介绍和说明一下 在埼玉县内的一个施工现场情况。就是某一家房产租户新的室内装饰施工。
房产租户的室内装饰地基工事是，为了把店铺和办公室等的最后加工后的空间，弄得很棒，就是很重要工程。充分做地基工事的结果，就能实现美丽的最后加工后的状态和很长期间的耐久性能。
首先，我们来说明一下地基施工工事的目的。地基工事是，把壁、地板地面、天棚等的表面，弄平的作业。地基工事的主要目的如下:
地基的调整・修补: 把地基的表面整齐得均一后，在施工壁纸・所谓的装饰用织物等最后加工材料时，成为不容易出现非均匀性或凹凸。由此，就能实现美丽的最后加工成果。
耐久性能的提高：地基工事时，我们来做适当的补强。由此作业，就提高室内装饰材料的强度和耐久性能。结果，可以减少很长时间使用之际会引起的劣化和损坏。
稳定性能：地基工事是，确保壁和天棚稳定性的重要工程。做个合适的地基工事后，可以被坚固地固定石膏板等，而确保它的安全性能。
钢骨的设置：地基工事的最初阶段是，轨道的设置。把轨道在合适的位置切断，而固定正确的位置。一边使用激光测定器来确认水平和垂直，一边坚固地安装轨道。
我们安装墙筋。对着轨道垂直地设置着的是墙筋。
安装补强材料：按照必要，我们安装补强材料。补强材料是，在开口部位等来安装。提高结构的强度和稳定性能。把补强材料配置合适的位置，使用螺丝钉等来固定。
安装板材：轻量型钢地基的最后工程是，安装板材。以一般的板材，有石膏板。把板材来切断合适的尺寸后，在轻量型钢地基使用螺丝钉来安装。
调整和修补地基：施工板材后，我们确认地基的平直性。按照需要，我们来调整或修补。为了补好凹凸和/或裂痕，我们使用合适的修补材料。使用修补材料，就确保施工面的均一性，而提高最后加工后的质量。
转移到最后加工工程：施工完轻量型钢地基后，我们转到下个工程。在最后加工工程，我们涂装、粘贴壁纸、施工地板地面等的室内装饰最后加工。因为轻量型钢地基是，对稳定性能和耐久性能有优势，所以顺利地进行最后加工材料的施工。此结果，可以实现美丽的室内装饰空间。
在上面，我们说明了，施工轻量型钢地基的基本流程。轻量型钢地基是，适合于被要求耐久性能和稳定性能的租户房产的室内装饰素材。为了施行此施工，需要专门知识和经验。因此，我们推荐各位要依赖有丰富经验的内行施工业界者。
～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～
关于办公楼・房产租户（店铺）的修复原状施工，入居施工，搬迁，撤退，整建整修施工等，如果各位在考虑要依赖这些施工的话，请务必跟我们公司随意地来联系！
各位也可以从SNS（社交网络服务）来查询
从报价到施工完毕，我们公司全部都是亲自安排施工工事，我们的目标是给客户供应「尽可能便宜的、质量高的好产品」。
★如果各位在找丰岛区池袋的室内装饰施工・修复原状施工，找办公室修复原状Dot. Com.★
邮编：〒171-0014
地址: 东京都丰岛区池袋2-62-10 武藏屋第三楼四层
免费电话: 0120-978-226
