Hello, everyone！ We here are Office recovery and restoration Dot.Com. website.
Our company office is at Ikebukuro, Toshima ward, Tokyo, and in all over Kanto district, we are an interior decorative construction work contractor, mainly taking charge of Interior decorative finishing construction・Original state recovery and restoration construction for you.
In this website blog, we are explaining various themes of office, while we are sharing construction site examples.
In order for you as a reader to read these articles with pleasure, we would like to supply useful pieces of information to those who are considering to request interior decorative work in the future.
Please take counsel on any kinds of office interior work with us.
The content which we are introducing and explaining this time is a part of「GL construction method」.
On sticking on gypsum board by using GL bond
This time, what we are explaining is not construction site example or construction state, but an actual construction method.
Tiger brand GL bond:： Quoted from Yoshino Gypsum Co.,Ltd. website
Gypsum board is one of widely used materials for interior decorative constriction.
Among them, GL bond has excellent adhesive strength and durability, so, it is effective to stick on gypsum board.
Sticking on gypsum board by using GL bond is, not only able to realize efficient and even finishing result, but also able to enhance durability.
In this article, we are explaining the method of sticking on gypsum bord by using GL bond gypsum board and its merits in detail.
GLボンドを使った施工の写真がこちら
The above is a construction picture using GL bond.
We are explaining the feature of GL bond and its usage.
GL bond is an adhesive used for sticking materials such as wood, plywood, gypsum board and so on. It has powerful adhesive strength and durability, so, it is suitable for sticking on gypsum board.
1 Preparing backing
Cleaning the wall surface, and neaten even state. If necessary, carrying on backing treatment.
2 Applying GL bond
Applying GL bond on the back side of gypsum board evenly.
Please be sure to use suitable GL bond amount, and applying it with uniformity as much as possible.
3 Sticking on gypsum board
Sticking applied GL bond surface and wall surface firmly, and sticking to gypsum board.
Then, pressing with suitable power, and securing even adhesiveness.
4 Drying and finishing treatment
After sticking on it, waiting until drying GL bond completely.
After that, doing joint treatment and finishing on the surface.
Joint treatment is, a process of treating crack, dent and so on at the gypsum board junction part in gypsum board sticking.
Gypsum board is not used as a big board, but by sticking plural board together to match the necessary size, the wall surface and ceiling are formed.
In order to fill the joint part and gap, to realize uniform and beautiful finishing, joint treatment is duly done.
Joint treatment is, an important process for neatly finishing the joint part of gypsum board in GL work method.
We are explaining the procedure of general joint treatment as follows:
1.Sticking joint tape
Sticking joint tape at the joint part of gypsum board.
Joint tape, plays a role of preventing crack, and enforcing joint part.
Let us stick the tape evenly at all of the joint part.
When sticking the tape, it is important to do this work operation by pressing the joint part firmly at the same time.
2.Applying joint compound (bond)
After sticking joint tape, filling the tape by using joint compound(bond). Joint compound, plays a role of neatening the surface of gypsum board, and unify the joint part. Let us use wide brush and sponge, and applying it to spread compound evenly.
3.Drying compound
Waiting for joint compound to be fully dried.
Let us confirm the drying time according to the product instruction.
If you want to shorten the drying time, it is possible to heat it or to use drying devise to shorten the time.
4.Sanding(polishing)
In order to smoothen the dried joint compound finishing, using sanding with sandpaper or sand sponge.
Getting rid of unnecessary 凹凸and surface roughness, neatening the joint part to even state.
After sanding, let us clean the wall surface with vacuum machine and cloth.
The above is a general procedure of joint treatment.
However, as to the concrete procedure and material usage, they may differ, depending on the site situation and construction condition sometimes.
We propose you to take counsel with a professional interior decorative contractor, and request to do a suitable joint treatment.
The picture to stick on gypsum board
・Firm adhesive strength
GL bond has excellent adhesive strength, and it firmly fixes gypsum board on the wall surface.
・Enhancing durability
Gluing with GL bond is excellent in durability, so, it protects long-term peeling and floating up of gypsum board.
・Efficient construction
By using GL bond, sticking on gypsum board work operation can be done quicky and smoothly.
・A suitable backing treatment is important. Let us clean up the wall surface and make it even politely.
・A suitable applying amount of GL bond and evenly applying are necessary. Let us carry on work operation according to the instruction, and strive to stick it on the board evenly.
If necessary, we recommend you to get an expert advice and guidance.
Sticking on gypsum board by using GL bond is, an important method on pursuing efficiency and durability in interior decorative work.
Because of the strong adhesiveness and durability, it prevents peeling and floating up of gypsum board, so, it keeps long-term beautiful finishing result.
While doing right method and suitable construction, let us stick on gypsum board by using GL bond. As the result, it may realize interior decorative finishing which excels in durability.
Your request・inquiry from here.
If you are interested or have request in interior decorative finishing work, please give us your inquiry light heartedly.
We will propose the most suitable planning and construction to match your requirement and budget.
An original state recovery and restoration construction site example using GL work method is here
～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～
If you are considering to request office building・tenant(shop or store) original state recovery and restoration work, moving in work, relocation, removal, reform work, and so on, please be sure to contact our company light heartedly!
You can also give us your inquiry from SNS social media. Please see them together by all means!
From price quotation up to construction work completion, our company is directly managing and doing construction work by ourselves.
Our aim is, supplying
「reasonable construction work as much as possible, and high quality, better work service」to our customers.
◆If you look for interior decorative work・original state recovery and restoration work at Ikebukuro, please just look for Office recovery and restoration Dot.Com.◆
Address: 〒171-0014
4th floor, Musashiya No.3 Building
62-10, 2-chome, Ikebukuro, Toshima ward, Tokyo
Free phone: 0120-978-226
Hello, everyone！ We here are Office recovery and restoration Dot.Com. website.
Our company office is based at Ikebukuro, Toshima ward, Tokyo, and in all over Kanto district, we are an interior decorative construction work contractor, taking charge of Interior decorative finishing construction・Original state recovery and restoration construction, mainly for you.
This time, we are introducing and explaining a construction work example in Saitama prefecture. It is about a certain new interior decorative construction at a tenant.
Interior decoration backing work of tenant is, a very important process for finishing it nicely. By fully executing backing work, beautiful finishing and long-term durability are realized.
We are explaining the purpose of backing work firstly. Backing work is, a work operation of flattening the surface of wall, floor, ceiling and so on. The main purposes of ground work are as follows:
Adjusting・repair and mending backing: By making uniform backing surface, it becomes difficult to occur irregularity or 凹凸 of wall paper・so-called decorative cloth and other finishing materials. As the result, beautiful finishing can be realized.
Enhancing durability: Proper enforcement is done for backing work. As the result, interior decorative material strength and durability are enhanced, so the long-term used deterioration and damage are reduced.
Stability: Backing work is an important process to secure the stability of wall and ceiling. By doing proper backing work, gypsum board and so on are firmly fixed, so the safety is secured.
Installing steel : The first step of backing work is, the installation of runner. By cutting runner to match the place of wall and ceiling, fixing it at the precise place. By using laser measuring instrument and so on, fixing runner firmly, while confirming horizontality and verticality.
We install stud. What is placed vertically against runner is stud.
Installing reinforcing material: We install reinforcing material if required. The reinforcing material is installed at the opening or so, and it enhances the structural strength and stability. We arrange reinforcing material at the proper place, and fix it with screw and so on.
Installing board: The final process of light steel backing is, installing board. As a usual board, there is gypsum board. We cut it into the proper size, and fix it at the light steel backing with screw.
Adjusting and reinforcing backing: After executing board, we check the evenness of backing. If necessary, we adjust and reinforce it. In order to neaten凹凸 and crack, we use the proper repairing and mending materials. By using the materials, we secure the constructed surface uniformity, and enhance the finishing quality.
Moving on to the finishing process: After completing the construction of light steel backing, we move to the next process. At the finishing process, we execute interior decorative finishing work such as painting, sticking wall paper, flooring and so on. As light steel backing excels in stability and durability, finishing material work is carried out smoothly, so it is possible to realize beautiful interior decorative space.
The above is the basic construction work process of light steel backing. Light steel backing is, a suitable backing material as tenant interior decorative material which is required for durability and stability. As the special knowledge and experience are required for its construction, as for the construction, we advise you to request a fully experienced contractor.
～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～
If you are considering office building・tenant(shop or store) original state recovery and restoration work, moving in work, relocation, removal, reform construction, and so on, please be sure to contact our company light heartedly!
You can also give us your inquiry from SNS social media. Please see them together!
From price quotation up to construction work completion, our company is directly managing and doing construction work by ourselves. Our aim is, supplying「reasonable construction work as much as possible, and high quality, better work service」to our customers.
★If you look for interior decorative work contractor at Ikebukuro, it is Office recovery and restoration Dot.Com.★
Address: 〒171-0014
4th floor, Musashiya No.3 Building
62-10, 2-chome, Ikebukuro, Toshima ward, Tokyo
Free phone: 0120-978-226～
Hello, everyone！ We here are Office recovery and restoration Dot.Com. website.
Our company is taking charge of「Interior decorative construction」「Original state recovery and restoration construction」mainly at Ikebukuro, and in all over Kanto district for you.
It seems that a part of property tenant construction sometimes cannot be executed during daytime too. During that occasion, as there is no other choice but to execute construction from night time to late at night, lighting is used.
The things called floodlight and working light in the following picture are often used.
There are a lot of various lighting equipment, from flashlight size to construction site use big size type, one which is suitable to use when snowing outdoor type, put-in and fixed type which can be lighted at the pinpointed place, and so on. They are called working light or floodlight.
Their usage and so on can be considered as the same. Probably, the biggest difference between floodlight and working light is, that of acceptable voltage. Floodlight is mainly used at the interior decorative construction site.
What can be connected to household electric power and used is floodlight, while, what is connected to battery and used is working light. Isn’t it that it may be easy to remember this by relating to the image of working light is used by connecting vehicle or generator battery? If used with unsupported voltage, it may cause the factor of trouble or accident. Therefore, let us do not do so.
Probably, what is often used at the interior decorative site is, lighting 360-degree multi-direction cylinder type. In the case of partly lighting hand and so on, it may be good to use each one properly by using one with clip or so on to match the necessary situation.
If you are worried about『office renewal・shop or store re-decoration』, interior decorative construction・original state recovery and restoration construction, and so on, please give us your inquiry light heartedly in the first place.
～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～
On office building・tenant(shop or store) original state recovery and restoration cnstruction・renovation decorative construction・recovery and restoration construction, moving in construction, relocation, removing, reform construction and so on, if you are considering to request, please be sure to contact us light heartedly.
It is also possible to give us your inquiry from SNS social media.
Please be sure to see it together.
From price quotation to construction work completion, our company directly manage and do all of construction work by ourselves.
So, we are supplying
「reasonable construction work as much as possible with high quality and better service」
to our customers.
◆If you look for interior decorative construction・original state recovery and
restoration construction at Ikebukuro, Toshima ward, please contact
Office recovery and restoration Dot.Com.◆
Address: 〒171-0014
4th floor, Musashiya No.3 Building
62-10, 2-chome, Ikebukuro, Toshima ward, Tokyo
