Hello, everyone！ We here are Office recovery and restoration Dot.Com. website.
Our company has an office at Ikebukuro, Toshima ward, Tokyo, and we are an interior decorative construction contractor, mainly taking charge of Interior decorative finishing construction・Original state recovery and restoration construction in all over Kanto district for you.
On this website blog, we are explaining various themes at the office and sharing construction site examples. In order to let this blog readers to enjoy reading them, we are thinking of supplying easy to understand and useful information to those who would like to request interior decorative construction in the future.
Kindly take counsel with us on any office interior decorative construction.
The content which we are explaining here is, on office OA floor/flooring construction partly.
This time,
It is on
「underlay (base treatment) construction method」
Quoted from FUKUBI Chemical Industry Co.,Ltd., website underlay ※pictorial image link
For OA floor/flooring, base treatment is one of the important operation work processes.
Underlay is, a material spreading under the floor.
Its roles are preventing hurt and sound on the floor, and enhancing the floor durability.
Because it is active as a floor/flooring material for various facilities,
it can be also used not only for office OA floor, but also for elderly dwelling and facility, educational facility, and so on.
We are explaining underlay construction method as follows:
Before spreading underlay, it is necessary to treat floor surface base.
Confirming that the floor surfacer is flat, and without dirt or hindrance.
Please also confirm that it is dry well, and get rid of dust and obstacle.
If required, spread materials such as gravel, sand and so on, then set it flat.
Spreading underlay on the floor surface.
The methods of spreading the underlay are, full spreading, half spreading ad so on.
Full spreading is, the method of spreading underlay on all over.
Half spreading is, the method of spreading underlay all over at a few centi-meter inside from the edge.
Full spreading method can be maintained evenly all over the floor, but by using a lot of material. While, as for half spreading, material used quantity can be smaller. However, as a demerit, underlay is easy to be shifted.
After finish spreading underlay, if required, fixing it by using adhesive.
When using adhesive, according to the construction method, coating it evenly on the floor, and thrusting the underlay from above. After the construction, please let off air with stripping-off rod. After the adhesive is dried, it is possible to lay OA floor/flooring.
※Point to be noted when executing finishing material
After executing FUKUBI underlay construction, please cure it for equal to or over than 24 hours firstly, then execute finishing material construction.
Please avoid laying floor finishing material and FUKUBI underlay joint together.
When cutting cushion floor and vinyl floor sheet together, please do not cut them overlapped with FUKUBI underlay.
Besides, please execute construction by following the construction method of each finishing material.
Summary
The construction methods of underlay are sometimes different according to floor types and construction contractors.
The important point is, the construction contractor has the suitable skill, and execute the precise construction.
In addition, before executing construction, it is necessary to fully check the important points such as laying the plan, treating the base, and so on.
That is all for our explanation of the construction method of underlay.
Finally,
On office interior decorative construction, please take counsel with us light heartedly.
～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～
On office building・tenant(shop or store) original state recovery and restoration cnstruction・renovation decorative construction・recovery and restoration construction, moving in construction, relocation, removing, reform construction and so on, if you are considering to request, please be sure to contact us light heartedly.
It is also possible to give us your inquiry from SNS social media.
Please be sure to see it together.
From price quotation to construction work completion, our company directly manage and do all of construction work by ourselves.
So, we are supplying
「reasonable construction work as much as possible with high quality and better service」
to our customers.
◆If you look for interior decorative construction・original state recovery and
restoration construction at Ikebukuro, Toshima ward, please contact
Office recovery and restoration Dot.Com.◆
Address: 〒171-0014
4th floor, Musashiya No.3 Building
62-10, 2-chome, Ikebukuro, Toshima ward, Tokyo
Hello, everyone！
We here are Office recovery and restoration Dot.Com. website.
Our company has an office at Ikebukuro, and we are mainly taking charge of「Interior decorative construction」 「Original state recovery and restoration construction」in all over Kanto district for you.
This time, we think we are briefly partly explaining tools used at the construction site.
It is further before interior decoration construction process.
It is mainly used for base part fundamental construction or making form frame work and so on.
As for interior decoration too, when constructing ceiling part, it seems to be necessary to use it.
There is laser marker.
If you do not want to hurt the room inside, or for DIY(=do-it-yourself) and so on, it seems to be precious.
The method to fix level string, it can be considered simple methods such as rolling and wrapping on heavy stone or so and hanged stretched with heaviness, or rolling and wrapping with stud or runner and so on.
However, depending on the necessary precision level, according to its purpose, let’s execute construction with suitable method.
Standard size of LGS (=light gauge steel) varies from 2.5m(=meter) to 5m.
However, depending on the construction site, it is sometimes necessary to adjust length.
In that case, the tool directly cutting at the site is high-speed cutter (also called high-speed cutting machine).
The difference from disc grinder is, if there is an attached part to fix materials.
Compared with high-speed cutting machine, as disk grinder is supported by hands, it is a relatively small product.
While, high-speed cutting machine is made as big size , and safety, stability, cutting precision and other features enhanced product.
In fact, disc grinder is not such a product made for cutting purpose, it is a product mainly made for grinding purpose.
So, it is good to consider that the machine can be also used for cutting (not good at).
If it is frequently used for cutting, it may be considered that by buying cutting use tool, safer work operation can be done.
It may be possibly used as the feeling of a substitute or so.
As machine tools such as high-speed cutting machine or so may lead to a danger of hurting or accident without sufficient maintenance, so we suggest you to be careful, before using it too, by checking it visually, and after using it, by fully maintaining it with rust preventive oil or so, to be able to do its work operation safely .
Those who have not finished the special education of free hand grinding stone, they cannot change or test run grinding stone.
For using it safely, before starting work operation or so, we suggest you to keep in mind to test run, and to check if there is strange noise or disorder feeling, and to do your best to be able to prevent accident.
When cutting LGS with high-speed cutting machine, sparks will emit, so we advise you not to put things around, and taking measures to place flameproof sheet or so at the surroundings in advance.
That is all for our explanation today.
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-=-=-=-=-=-
Let alone ceiling, wall repair and remedial work, painting work, on shop or store new opening and renewal, please be sure to take counsel with Office recovery and restoration Dot.Com. light heartedly.
We are waiting for your follow of「Instagram, Twitter, Facebook」.
From price quotation to construction work completion, our company directly manage and do all of construction work by ourselves.
So, we are supplying
「reasonable construction work as much as possible with high quality and better service」
to our customers.
Of course, please do not hesitate to compare our quotation with other companies’, as we welcome competitive quotations.
「Which construction contractor should we request?」
「How much is the approximate construction cost?」and so on,
besides above also, we are waiting for your questions.
On office・shop or store・warehouse relocation, original state recovery and restoration work, reform work(interior decorative construction), and so on, please give us your inquiry light heartedly in the first place.
～～～～～～～～～～～～～～～～～～～～～～IKEBUKURO～～～～～～～～～～～～～～～～～～～～～～～～
★If you look for interior decorative construction contractor at Ikebukuro, it is Office original state recovery and restoration Dot.Com.★
★If you also look for original state recovery and restoration work in Tokyo, it is Office original state recovery and restoration Dot.Com.★
Address: 〒171-00144th floor, Musashiya No.3 Building62-10, 2-chome, Ikebukuro, Toshima ward, Tokyo>Free phone: 0120-978-226
～～～～～～～～～～～～～～INTERIOR DECORATIVE CONTRACTOR～～～～～～～～～～～～～～～～<
Hello, everyone！ We here are Office recovery and restoration Dot.Com. website.
Our company has an office at Ikebukuro as the midpoint, and in all over Kanto district, we are mainly taking charge of「Interior decorative construction」 「Recovery and restoration construction」for you.
Stepladder, foothold stand, movable interior foot stage and so on, there are various footholds used at interior construction sites. This time, we are explaining seif-moving high altitude work vehicle which we do not see very often? As for executing interior decorative construction at high ceiling sites are not often after all. So, above-mentioned stepladder, foothold stand, movable interior foot stage and so on are enough for almost all the cases. However, when it comes to factories and the like, as their ceilings may be high, high altitude work vehicle or high altitude work platform may be used sometimes.
This time, we think we are explaining them with those construction site pictures.
Firstly, as for the definition of high altitude work vehicle, it is pointed to be a self-moving machine which has work floor to be able to be lifted up equal or higher than 2 meters, and by using power of lifting up and down device, motion device and so on. Among high altitude work vehicle, it is necessary to have special education course evidence of lifting up and using equal to or higher than 2 meters and less than 10 meter high work vehicle. While, it is necessary to have skill training course evidence of lifting up andusing higher than 10 meter work vehicle. Only a day may be possible to get special education course evidence. In the case of skill training course, even if part of the training program is remitted to attend, it seems to require two days at least.
For those who have the evidence of high altitude work vehicle driving of special education, you should be careful it does not mean to be able to be a work chief person.
If there are other plural persons who are able to be work chief working together, those who have special education evidence only is permitted. But, if there is not any person to be work chief, or there are only one or two those persons, it may be advisable to attend that lecture and have the evidence too.
Different from high altitude work vehicle, concerning high altitude work platform, it is not necessary to get any evidence or license for using one.
It is also possible to drive truck type high altitude work vehicle on the public road. However, it comes to be necessary to get suitable driving license according to loading capacity and vehicle total weight. So, when driving on the public road, getting semi-medium driving license or getting medium size driving license may come to be necessary.
When it comes to be in interior decorative construction industry, it seems that using foothold stand and interior decorative work use foothold are enough at work sites in almost all the cases. However, as similar to high altitude work platform, we have briefly touched on high altitude work vehicle this time too. In order to use both safely, it seems to be important to use them properly (As for high altitude work vehicle, getting its driving license is also necessary.).
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Let alone ceiling, wall repair and remedial work, painting work,
shop or store new opening or renewal, please be sure to talk with Office recovery
and restoration Dot.Com. light heartedly.
We are waiting for your follow of「Instagram, Twitter, Facebook」.
From price quotation up to construction work completion,
our company is directly managing and doing construction work by ourselves.
So, we are supplying「reasonable construction work as much as possible, and high quality, better work service」to our customers.
Of course, please do not hesitate to compare our quotation with other companies, as we welcome your competitive quotations.
「Which construction contractor should we request?」
「How much is the approximate construction cost?」and so on, besides above also, we are waiting for your questions.
On office・shop or store・warehouse relocation, recovery and restoration work, reform work(interior decorative construction), and so on, please give us your inquiry light heartedly in the first place.
～～～～～～～～～～～～～～～～～～～～～～～IKEBUKURO～～～～～～～～～～～～～～～～～～～～～～～
★If you look for interior decorative work contractor at Ikebukuro, it is Office recovery and restoration Dot.Com.★
★If you also look for recovery and restoration work in Tokyo, it is Office recovery and restoration Dot.Com.★
Address: 〒171-0014
4th floor, Musashiya No.3 Building
62-10, 2-chome, Ikebukuro, Toshima ward, Tokyo
Free phone: 0120-978-226
～～～～～～～～～～～INTERIORDECORATIVE CONSTRUCTION WORK CONTRACTOR～～～～～～～～～～
