オフィシャルブログ

月別アーカイブ: 2022年6月

고소작업대

안녕하세요.사무실회복닷컴입니다.

이케부쿠로를 중심으로 관동일대에서「원상회복공사」「인테리어공사」를 운영하고 있습니다.

사다리,아시바,이동식실내아시바등 인테리어공사에서 사용되는 아시바의 종류는 여러가지가 있지만 이번엔 높은 천장의 시공시이외에는 그다지 볼수 없는 자동식고소작업차에 대하여 사진과 함께 소개해드리겠습니다.

먼저 고소작업차의 정의입니다만,작업바닥이 2m이상으로 상승할수 있는 기능을 갖고 있고 승강장치,주행장치 등에 의한 동력을 이용하여 자동적으로 달릴수 있는 기계를 가리킵니다.

고소작업차중에서도 2m이상 10m미만이라면 특별교육수료증, 10m를 넘는것에 대해서는 기술강습수료증이 필요됩니다. 특별교육은 하루에 취득할수도 있지만,

기술강습인 경우는 일부 강습과목이 면제된다하여도 최단 2일 걸립니다.

 

 

고소작업차운전특별교육수료자로서는 작업주임자로는 될수 없는 점에 주의가 필요합니다.

그외에 작업주임자로 될수 있는 사람이 여러명 있으면 특별교육만으로도 되지만,

작업주임자로 될수 있는 사람이 없는가, 1~2명밖에 없다면 기술강습을 받는것도 검토해보는것도 좋을것 같습니다.

 

고소작업차와 달리,고소작업대에 관하여서는 특별자격은 필요없습니다.

 

 

고소작업차는 트럭식인 경우에는 공도도 달릴수 있지만, 적재량이랑 차량총중량에 따라서는 면허증이 필요하기 때문에 공도를 달릴 때는 준중형면허랑 중형면허가 필요하게 됩니다.

 

인테리어공사업이라면 아시바랑 실내작업용아시바로 거의 충분하다고 생각하지만,

고소작업대와 비슷한 말(단어)로 이번엔 고소작업차에 대하여 간단하게 이야기하였습니다. 어느것도 안전하게 사용하게 위해서는 정확한 사용방법을 하는것이 (고소작업차인 경우에는 자격이 필요) 제일입니다.

 

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

천장이랑 벽의 보수공사, 도장공사는 물론 가게의 오픈이랑 리뉴얼의 상담은 저희 사무실회복닷컴으로 상담해주세요.

 

오피스리뉴얼상가리모델링등 인테리어공사원상회복공사 등 등

궁금하시는 사항에 있으시면 저희 사무실회복닷컴으로 문의해주세요.

 

「Instagram、Twitter、Facebook」팔로우와 좋아요 잘 부탁드립니다.

Instagram     Twitter     Facebook   

저희 회사는 견적에서 시공완료까지 모두 당사에서 실시함으로

고객님께조금이라도 싸게그리고 좋은 품질과 좋은것을제공하고 있습니다.

 

물론,다른 회사와 비교해도 괜찮습니다. 비교견적도 환영합니다.

어디에 의뢰하면 좋을까요? 공사비용은 얼마일까

상기외의 질문도 언제든지 연락주세요.

사무실상점창고의 이전,원상회복공사리모델링공사 (인테리어 공사등등

우선은 부담없이 문의해주세요.

~~~~~~~~~~이케부쿠로 ~~~~~~~~~~

★ 이케부쿠로 인테리어업체라면 사무실회복닷컴 ★

★ 도쿄의 원상회복공사도 사무실회복닷컴 ★

〒171-0014

도쿄도 토시마구 이케부쿠로 2-62-10무사시야 제3빌딩 4층

TEL : 0120-978-226

~~~~~~~~~실내인테리어업체~~~~~~~~~

状況に応じたオフィスのリニューアル

お世話になっております、オフィス回復ドットコムです。
池袋を中心に関東一円範囲で「内装工事」「原状回復工事」をメインにお手伝いさせていただいております。

 

今回は、

 

状況に応じたオフィスのリニューアル

 

というテーマでお話させていただきます。

 

まず、オフィスをリニューアルするタイミングとして、どのような場合が思い浮かびますか?

テナント店舗のように短いスパンで変更することはありませんが、
特にここ数年、コロナウイルスの流行をきっかけにオフィスの在り方が大きく問われることとなりました。

 

オフィスが所在している以上、通勤している人が少なかったとしても快適で、実用的であるべきかと思われます。

私なりの観点で、オフィスをリニューアルするのであればどのような点に注目したらよいか、考えてみたいと思います。

 

 

 

オフィスはただあれば良いというものではなく、時代や状況に応じて変化させるべき

 

皆さまのオフィスでは、常時何人の社員さん(あるいはアルバイト・パートさん、出向社員さんなど)がいて、それぞれどのような業務をしていますか?

 

会社が小規模であれば、1人1人がそれぞれいろんな業務を兼業したり、
反対にある程度の規模になっていくと、それぞれ部署があり、1フロアの中でも各部署同士の横の繋がりすらない、ということすらありえます。

 

そのような多種多様なオフィスを、すべて1つの空間、同じ配置の机にて島だけ作って終わりというのはあらゆる点で問題が発生しかねません。

 

 

まずは下記に、オフィスにおける業務上の問題点を列挙させていただきます。

 

  • ●他部署や、他会社の境界があいまいなため、書類の管理などが大変になる
  • ●人数が少ないからとフロアに狭しと社員が押し込められ、リラックスできない
  • ●全ての部署、他会社にて同一の会議室の予約の取り合いが発生し、しかも壁が薄かったり、機密漏洩の恐れがある
  • ●逆に、整然とした机の配置のため社員同士のコミュニケーションが不足している
  • ●大きなフロアにたくさんの社員が出勤していたが、今はテレワークにて社員数が半数以下となっているため、席にまばらに社員が座る状態となっている

 

などが挙げられます。

 

私が過去に在職していた会社でも、大きなフロアに様々な部署が混在し、
長机の島にて会社や部署を分けられていたのですが、通路が近所にあり、
書類の管理は大変厳しかった記憶があります。

 

また、長机も横に5~6人ほどの幅を2列というようになっていたため、
端から端や、対角線上の方とのコミュニケーションが非常に取りづらかったです。

 

これらはあくまで一例ですが、そのような問題点が発生した際オフィスをそのままにしておくのは非生産的であると考えられます。

 

次に、オフィスをリニューアルする際着目すべき点を列挙させていただきます。

 

 

 

オフィスをリニューアルする際、着目すべき点

 

  • ●現在の業務内容や、勤務時間・人数などに即しているか
  • ●社員のモチベーションダウンに繋がらないか、また受付や来客スペースであれば会社のイメージアップにつながるようなデザインになっているか
  • ●動線や部署ごとの人の動きが妨げられないようになっているか

 

 

 

現在の業態・業務内容や、勤務時間・人数などに即しているか

 

前述したように、特にここ数年でコロナ禍に限らず、世の中が目まぐるしく変化しています。

そうした中で、できる限り何度もリニューアルをすることなく、なおかつ現在出勤しているメンバー、テレワーク等しているメンバーが双方とも快適に過ごせるように配慮すべきです。

 

比較的よく目にする改善案の一つに、フリーアドレス席出向社員向けのスペースを設けるなどがあります。

 

日々出社する社員が変わるような職場であればPCをノートPCにし、出社した社員同士が近くに座ることができれば、意思疎通がしやすくなるかもしれません。

 

また、出向社員がいるオフィスであれば正社員向けの機密性の高いエリアへは踏み入ってほしくない、という場合があるでしょう。

そのような時、出向社員や、それを管理したり共に業務を行うメンバー向けの空間があると、機密文書の保管や、内密な話をしやすくなるかと思われます。

 

会議(商談)をしているイメージ画像。
画像は写真acより。 社外の人と打ち合わせをする場合、当然ではありますが通路に書類の置かれた机や電話、会話によるやり取りが行われている空間と隔離されているべきです。 機密情報を保持するためです。

 

 

 

社員のモチベーションダウンに繋がらないか、また受付や来客スペースであれば会社のイメージアップにつながるようなデザインになっているか

 

 

例えば、テレワーク社員が増えたことによりフロアを減床したとします。

単純に狭くした空間にオフィスを詰め込んでしまうのでは、動線やパーソナルスペースが失われかねません。

 

机やイスも、場合によってはスペースに則したものに変更したほうが良い場合もあります。

 

 

受付や来客スペースのデザインも重要です。

面談に来られた方が会社にいい印象を持ってもらえるよう、また上記にも挙げさせていただきましたように、来客対応の空間で機密性の高い会話が行き交うことのないよう、
パーテーションを設けたり、立ち入り禁止エリアを策定する必要があります。

 

 

 

動線や部署ごとの人の動きが妨げられないようになっているか

 

 

例えば文書の保管スペースなどがすべて共用になっており、それがとある部署の近所にあるなどの場合、通路に頻繁に他部署の人々が通行するようになり業務がスムーズにいかなくなるなどの問題が発生してしまうかもしれません。

 

おしゃれな空間は人の心を高揚させますが、オフィスはあくまでも業務を行うところですので、円滑に業務が行えるようなオフィスを作り上げなければなりません。

 

 

 

おまけ

 

 

弊社で過去に施工したオフィスの事例を簡単に紹介します。

 

 

その①

 

 

オフィスの施工写真その1。ガラスパーテーションが多く施工され、開放感のあるオフィスとなっている。

オフィスの施工写真その①
施工中の写真ですが、こちらのオフィスはガラスパーテーションを多用しており、開放感のあるオフィスとなっております。

 

オフィスの施工写真その①です。

黒を基調としたオフィスで、各所にガラスパーテーションが使用されており、
部屋を区切りつつ圧迫感の無いようにデザインされております。

 

なお、今回写真は割愛させていただきますが、エントランス部分は来客対応も行うため、
タイルがあしらわれ、オフィスと異なる印象に仕上がっております。

 

 

オフィスの施工写真その②
こちらは既存の白を基調としたオフィスの一部の壁を塗装したり、間仕切にガラスパーテーションを使い、活気と落ち着きのある空間となっています。

 

オフィスの施工写真その②です。

こちらは白を基調とした一般的なオフィスに、黒縁のガラスパーテーションや塗装壁でアクセントカラーを取り入れております。

 

 

 

まとめ、最後に

 

 

 

 

以上、状況に応じたオフィスのリニューアル について、ざっくりとお話させていただきました。

 

オフィスにて、

 

  • コロナ禍や、近年の働き方改革でオフィスを減少したい、または増床・移転を考えている
  • 業態転換に伴いオフィスをリニューアルしたい
  • 出向社員や新たな部署の設置の伴い打ち合わせスペースがほしい

 

 

など、内装工事一式承っておりますので、

「この工事であればいくらくらいかかるのか」

「こういうプランがあるが、実現可能であるか」

など、お気軽にどうぞご相談下さい。

 

 

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

オフィス・店舗の天井や壁の補修工事、塗装工事はもちろん、
新規オープンやリニューアルのことなど、ぜひオフィス回復ドットコムまでお気軽にご相談ください。

 

「Instagram、Twitter、Facebook」フォローお待ちしております。

 

Instagram     Twitter     Facebook   

 

 

当社は、お見積もりから施工完了まで全てを自社で行い
お客様に「少しでも価格を安く、品質が高くて良いもの」を提供しています。

もちろん、他の会社様と比べて構いません。相見積もりも大丈夫です。

「この工事はどのように行うのか、またその工事費用はどれくらいかかるのか」など、
ご質問・お問い合わせお待ちしております。

オフィス・店舗・倉庫の移転、原状回復工事、リフォーム工事(内装工事)等々
まずはお気軽にお問い合わせ下さい。

 

~~~~~~~~~~~~IKEBUKURO~~~~~~~~~~~~

★東京・池袋の内装業者ならオフィス回復ドットコム★

★原状回復工事もオフィス回復ドットコム★

〒171-0014

東京都豊島区池袋2-62-10 武藏屋第3ビル4階

TEL:0120-978-226

~~~~~~~~~~~NAISOUGYOUSHA~~~~~~~~~~~

 

 

 

 

 

What is safety patrol? What is being done, and watched

Hello everyone!We here are Office restoration Dot.Com. website.

Mainly at Ikebukuro, in all over Kanto area, we are executing construction work professionally of 「Interior decorative finishing work」「Recovery and restoration work」.

 

This time, changing our usual preference, we are explaining the theme of,

 

What is safety patrol? What is being done, and watched

Due to a matter of convenience of the theme, please also take attention as we may also touch some points on whole construction work including other than interior decorative work roughly.

After brief explanation on safety patrol, we are also going on explaining where to be watched and executed.

 

Contents

1 What is safety patrol?

2 What kind of points are to be checked?

2.1 Checking out tools and the like, the situation of checking

2.2 If work operation procedure is suitably set, and if it is being executed accordingly

2.3 If work operation area and work operation range safety are kept, and its method of keeping safety is suitable?

2.4 Ancillary to above, whether putting work site in order and cleaning work site or so are executed or not?

3 Summary

 

What is safety patrol?

Safety patrol is, in order to maintain work site safety, each work site contractor personnel in charge actually is patrolling(rounding) , and checking if problem is occurring safety wise.

As for workers at work site, there also may be abbreviation called it as「An pato(in Japanese)」or so.

(There is a case of safety personnel in charge at a general construction contractor doing by own self too)

 

When a relative work site starts its actual work, the general contractor reveal and examine every can-happen dangers. From that, we will request each work site contractor to do site work operation.

 

However, at work sites where can often occur different methods or unthinkable aspects, in encountering every certain pose(or before encountering it), we may request patrolling again by considering each contractor’s point of view, and checking if its maintaining safety standards is becoming the safest and prompt method.

 

Therefore, by labeling as safety patrol, a general contractor requests each site contractor to go to see「In present work site situation, if safety standard decided as 〇〇 should be satisfying, or if there should be improving points」and also by maintaining work site safety, thus we are keeping construction work quality.

 

What kind of points are to be checked?                                                                                                       

 

As to what kind of points are being checked, if we directly state the conclusion,

It differs according to each work progress situation, or each work contractor.

However, as it is「safety patrol」, we should go on checking all of the points relating safety.

 

Basically,

 

・Situation of examining tools or so, and checking

If work operation procedure is being suitably arranged, or is duly executed

・If work operation place or work operation range is kept safely, or if the method of maintaining safety is suitable?

・Ancillary to above, if putting site in order, cleaning site is executed?

 

Checking above these items or so from general work contractor to each work contractor’s supervisor.

Usually, as to safety patrol, general work contractor let each work contractor make points to check, and each work contractor’s supervisor does its evaluation. If there is an awful place, it should be corrected.

As to a lot of general work contractors, 「checking lists」are made, and evaluation will be done according to them.

As a supplement, if doing visual search of「safety patrol check list 」or so by internet, then relative checking lists of various work contractors are hit.

Actually used lists besides template should not be printed or used freely. However, as to what kind of items other companies are checking, probably it seem to be worth for reference.

 

By applying above itemized sentences to interior decorative work as much as possible, we will go on enumerating them.

 

Checking out tools and the like, and checking situation

As for interior decorative construction work too, we use a lot of tools.

This time, we are explaining them roughly as follows.

 

On foothold

(Step ladder, scaffold ladder, step stool or so)

立ち馬。点検をきちんと行います。

立ち馬。天板に乗っての作業を前提とした足場で、天板部分や脚部を伸長し、高さや長さを変えることができる。(長さなどは変えられないタイプもあります)

Scaffold ladder. It is a kind of foothold presupposing work operation on top board. Extending top board area or its leg, we can change its height and length. (There is a kind unable to change its length or so too.)

 

Tools are usually set each usable life ages. They cannot be used over than the periods.

We check if a foothold used does not expire each life age, if the product is properly operating, is locked, and is not worn away, according to the manufacturer recommending checking method.

In addition, we also check if it is not rusted or mud is going into it or so, then its motion is worsened. Depending on the situation, we shall clean and maintain them.

 

On tools

(Cutter, impact driver, other construction work using electric and hand tools)

 

Same as foothold, almost all tools are also set their usable life ages.

We check if they are not used over the periods, and regular maintenances shall be done.

 

If work operation procedure is suitably set, or is accordingly executed

 

Even if the same construction work process is entrusted, possible dangerous situation at work site is changing, depending on construction work sites and work progress status.

Therefore, in the first place, when general construction work contractor enters work site, it will let each work site contractor decides 「in order to execute construction work safely and smoothly, what kind of process it should do and how to carry out 」.

 

On that, general construction work contractor will precisely let each site work contractor to patrol again if the work process is set and kept to do actual work by workers.

 

For example, please suppose「When executing this construction work at this place of ceiling, using 〇〇cm or more length scaffold ladder, not using stepladder, a single worker should not do work operation alone」, which should exist as work operation process.

As for safety patrol, we will go on checking if these are really right process, and if the process is being observed.

Even if other work site should be considered right, it may not be always safest at the work site this time still under present situation.

 

If you happen to feel something as a problem, you have to examine different method. Even if it is right, but cannot be observed, then it is meaningless. So, we shall study what to do to be able to observe.

 

If work operation area and work operation range safety are kept, and its method of keeping safety is suitable?

頭上注意の印。狭い部分なのでテープにて簡単ではあるが注意を促している

弊社施工の現場にて、足場頭上部分に「頭上注意」のテープを貼り、注意を促している。

Above picture at our company work operation site, sticking the tape of 「Watch your head」at foothold overhead area, demanding caution

 

As many of work operation area is freshly made building, so at footing and overhead areas, opening part, or overwrapping work operation range with other types of industry or so, there are a lot of hidden dangers.

 

Therefore, at safety patrol, we will check「if the work site is kept safely and correctly as much as possible」or「how it is maintained」。

 

For example, please suppose an arrangement of 「At a work operation on 〇〇, there is a ceiling construction work with equipment contractor at the same room. Meeting in advance, then in case it is still necessary to do work in the close area at the same time, then equipment contractor does from east area, and interior decorative contractor does from west area. Both should say something in advance.」 is done.(It is still just for an example, so it is not necessarily right method of keeping work site safety.)

We are going to consider if those arrangement is precisely observed, and if there should be safer method・countermeasure.

 

Ancillary to above, whether putting work site in order and cleaning work site or so are executed or not?

 

There is a word of 5S at work site and factory, which is supposed to be must.

Respectively, these meanings are putting in order・tidying up・cleaning・neat・discipline in Japanese sound starting from S.

We check if they are executed from safety point of view.

This time, we only limit to explain roughly as below,.

If passage from material moving in entrance~to work site is neatly divided(putting in order)

If there are not easily stumbling waste materials or tools or so placed at footing area(cleaning)

Or if those are made public(discipline)

5Sの一つ、清掃は美観の他、つまづき、踏み抜きなどを防ぎ安全のためにもなります

5Sの一つ、清掃(掃除)は、見た目の美化だけでなく廃材などで足を怪我しないためにも行われます

Above picture is one of 5S, cleaning is done not only for visual beauty, but also for preventing foot or leg injury for waste materials

 

Of course, delay of fixed construction work period should not happen.

If labor accident should occur, operation workers cease to work, and work site stops. Furthermore, that may lead to image down of general work contractor’s point of view. So, making light of safety means no good at all.

 

It seems that correct execution of 5S can be said reasonable.

 

Summary

We have so far briefly explained what is safety patrol, and what is watched at safety patrol.

Concisely making summary as below,

 

・Safety patrol means a kind of checking activity of general construction work contractor own or general work contractor request each work site contractor, under present work site situation, if the construction work is executed by best possible safety method and condition.

・Literally, by checking safety related items from plural viewpoints, based on advanced made check list, evaluate them.

・By maintaining work site safety, it is playing a role of preventing delay of work period arising from labor accident or image down.

 

From viewpoint of laborers working at work site, it often seems that safety patrol can be a kind of「haltering work operation efficiency, dismal habit」.

However, a general construction work contractor has to do their best to let each work contractor under to work without occurring any injury, and complete site work to the end.

We are thinking of wishing all of you to understand that safety is irrespective of general work contractor・subcontractor, which is a necessary item required for all people.

 

In addition, by observing safety at work site, there are a lot of things that we also feel relative construction work will proceed smoothly too.

 

Our company also consider to observe daily safety, and to focus our energies and minds so as not to occur labor accident from now on too.

=-=-==-=-=-=-=-==-=-=-=-=-==-=-=-=-=-==-=-=-=-=-==-=-=-

 

Let alone office・shop or store ceiling or wall recovery work, and painting work, concerning newly opening, renewal and so on, please be sure to consult with our Office restoration Dot.Com. website light heartedly.

 

We ae waiting for your follow up of our 「Instagram, Twitter, and Facebook」.

Instagram     Twitter     Facebook   

 

 

 

From price quotation up to construction work finishing, our company is directly managing and working by ourselves, so we are aiming to supply「most reasonable, high quality and good products」 to you.

Of course, we do not mind if you compare our quotation with others, as we welcome it.

「How should we execute this construction work? Or how much does it cost approximately? 」or so on.

We are waiting for your question・inquiry.

On office・shop or store・warehouse relocation, recovery or restoration work, reform work(interior decorative construction work) , and so on, please be sure to give us your inquiry light heartedly in the first place.

 

~~~~~~~~~~~~~~~~~~~~~~Ikebukuro~~~~~~~~~~~~~~~~~~~~~~

★If you look for interior finishing company in Ikebukuro, ask Office restoration Dot.Com★

★If you also look for office restoration work in Tokyo, ask Office restoration Dot.Com.★

Our address: 〒171-0014 4th floor, Musashiya No.3 Building, 62-10, 2-chome, Ikebukuro, Toshima, Tokyo

Free phone: 0120-978-226

~~~~~~~~~~~~~~~~~INTERIOR FINISHING COMPANY~~~~~~~~~~~~~~~~~