カテゴリー別アーカイブ: BLOG【English・中文・한국어】

Hello！We are Office restoration Dot.Com. website.

We are doing decorative finishing construction work of 『Interior decorative work』『Restoration work』and the like, mainly at Ikebukuro area, Tokyo, the midpoint and also in all over Kanto area, for you.

Before opening shop or store, or office, an important work so-called「interior decorative finishing work」 shall be carried out. Literally, it is 「a work for finishing building interior decoration」. We think that many of you may not understand well what kind of interior decoration the actual object is in details.

Today, we are thinking of explaining description of work on the「interior decorative finishing work」 in detail.

What is Interior decorative finishing work industry?

It is a kind of construction industry carrying out decorative finishing work in the buildings using wood material, gypsum board, sound absorbing board, wall paper(cloth), tatami(=straw floor mat), vinyl floor tile, carpet, fusuma(=sliding paper door), and so on.

We can point out work examples as interior work, ceiling finishing work, wall sticking work, interior decoration partition work, floor finishing work, tatami work, fusuma work, furniture work, sound insulation work.

In addition, as interior decorative work, facility work of electricity・gas・water supply・air-conditioning and so on may be included.

Timing of interior decorative finishing work

Interior decorative finishing work may start around when proceeding exterior decorative finishing work, and anxiety of rain water flooding has gone.

For this reason, when constructing tower building and the like, even if exterior decorative work is still carried out at rather upper floors, there may be a possibility of already setting about interior decorative finishing work starting from rather lower floors where exterior decoration work has already finished earlier.

Details of interior decorative finishing work

We think of going to explain a few detailed works of interior decorative finishing work which we already introduced briefly above.

Wall sticking on work

It is a kind of work to go on sticking cloth or tile and others on wall bedding.

Depending on the kind of bedding, work method may vary. In general, similar to finishing at ceiling, direct sticking work method is usual.

If space of mounting heat insulating material or so is necessary, we use horizontal material to mount on wall bedding.

Ceiling finishing work

At the ceiling, there are two kinds of ceiling materials, which are ceiling bedding material and ceiling finishing material. According to the place for usage, such as personal residence, building, office and so on, it is going to be varied.

In general, as for ceiling finishing work, we go on directly sticking gypsum board, then carry on work by finishing on light steel or wooden structured ceiling bedding.

By painting, sticking cloth, sticking on panel and decorative board and so on, we use the materials to match the site, then complete interior decoration.

In order to tolerate the weight of gypsum board, we go on firmly stretching around the mounting of wooden bedding, then strengthen its structure.

The process from wall or ceiling bedding to finishing is as follows:

Marking

Wall bedding

Ceiling bedding

Ceiling finishing

Wall finishing

Floor finishing

Others

By marking work, we mark base line, then we go on mounting bedding(=light gauge steel) to stick on gypsum board at wall or ceiling.

Interior partition work

It is, a kind of work to install partition wall at shop or store room. For partition of shop or store, or office, most popular and highly sound insulating property steel partition or highly cost performance LGS(=light gauge steel) regular wall is normally used.

Floor finishing work

It is a work of sticking on floor finishing materials such as flooring, cushion floor, carpet, tile and so on. For floor finishing work, there are two kinds of work method of 「floor joist work method」 and 「direct sticking work method」, the former is mounting floor joist and isolating floor surface from bedding, while the latter is directly sticking floor finishing material.

As for detached house, floor joist work method is more often used, while direct sticking work method is mainly adopted for shop or store, or office.

Sound insulating work

In the case of studio and the like, considering neighborhood houses and shop or store, sound insulation work may be necessary to carry out. For sound insulating work, checking noise level nearby shop or store first, then carrying out setting countermeasure target value based on nearby control standards. Construction work contractor shall show countermeasure plan based on countermeasure target value and work plan. Soon after the requesting customer agrees on them, the construction work will start.

Summery

Construction work contractors which carry out interior decoration finishing work ought to have already obtained authorized general construction industry license. Full-time technical staffs who have relative Japanese national qualification are on the register.

That is all for today.

On 『Office renewal・shop or store renovation』 interior finishing decoration work・restoration work and so on, if you are in trouble or worried, please feel free to give us your inquiry in the first place.

We are waiting for your follow up of our Instagram, Twitter, and Facebook.

Instagram     Twitter     Facebook   

From price offer to construction finishing decoration work, our company is directly managing by ourselves, so we are supplying more reasonable and high quality and good products to you.

～～～～～～～～～～～～～～～～～～～～～～Ikebukuro～～～～～～～～～～～～～～～～～～～～～～

★If you look for interior finishing company in Ikebukuro, ask Office restoration Dot.Com★

★If you also look for office restoration work in Tokyo, ask Office restoration Dot.Com.★

Our address: 〒171-0014 4^th floor, Musashiya No.3 Building, 62-10, 2-chome, Ikebukuro, Toshima, Tokyo

Free phone: 0120-978-226

～～～～～～～～～～～～～～～～～INTERIOR FINISHING COMPANY～～～～～～～～～～～～～～～～～