カテゴリー別アーカイブ: Recovery and restoration construction work

Hello everyone！We here are Office restoration Dot.Com. website.

 

Today, we would like to explain a construction work example of system ceiling framework construction work at an office building.

In the first place, system ceiling is a kind of hanged ceiling basically, with equipment such as air-conditioner and lighting or so, mounted together with ceiling board material at attic, that is a ceiling which is set so as to be put in at bedding・frame.

A merit of system ceiling is very high maintenance quality. Let alone ceiling material itself, ceiling equipment such as lighting or so can be easily moved・changed too. Therefore, it is rather easy to correspond to layout change. When a part of ceiling material or equipment happen to be deteriorated・damaged, it can be soon renewed too. As ceiling material is mounted in a linear manner, it is also smart visually.

 

Then, we would like to explain the flowing of relative construction work.

It is construction work of ceiling recovery and restoration work after moving out sliding wall.

Sliding wall is an easily movable partition which can be partitioned in a room. Its system is moveable by using hanged rail installed at ceiling.

 

Then, the following are site pictures at system ceiling framework construction work after moving out sliding wall

Above all are site pictures of system ceiling framework construction work.

After this, the construction work will be completed by mounting board. However, the operation work of our company will be over by mounting framework.

 

As it is possible for our company to do any relative construction work, so please be sure to give us your inquiry light heartedly.

 

On 『office renewal・shop or store modifying』, interior decorative finishing work・restoration work and so on, if you are in trouble or worried, please feel free to give us your inquiry in the first place.

Please follow up our Instagram, Twitter, and Facebook light heartedly.

 

 

Instagram     Twitter     Facebook   

 

From price quotation up to construction work finishing, our company is directly managing and working by ourselves, so we are aiming to supply「most reasonable, high quality and good products」 to you.

 

Hello everyone！We here are Office restoration Dot.Com. website.

Mainly at Ikebukuro, in all over Kanto area, we are executing construction work professionally of 「Interior decorative finishing work」「Recovery and restoration work」.

 

This time, changing our usual preference, we are explaining the theme of,

 

What is safety patrol? What is being done, and watched

Due to a matter of convenience of the theme, please also take attention as we may also touch some points on whole construction work including other than interior decorative work roughly.

After brief explanation on safety patrol, we are also going on explaining where to be watched and executed.

 

Contents

1 What is safety patrol?

2 What kind of points are to be checked?

2.1 Checking out tools and the like, the situation of checking

2.2 If work operation procedure is suitably set, and if it is being executed accordingly

2.3 If work operation area and work operation range safety are kept, and its method of keeping safety is suitable?

2.4 Ancillary to above, whether putting work site in order and cleaning work site or so are executed or not?

3 Summary

 

What is safety patrol?

Safety patrol is, in order to maintain work site safety, each work site contractor personnel in charge actually is patrolling(rounding) , and checking if problem is occurring safety wise.

As for workers at work site, there also may be abbreviation called it as「An pato(in Japanese)」or so.

(There is a case of safety personnel in charge at a general construction contractor doing by own self too)

 

When a relative work site starts its actual work, the general contractor reveal and examine every can-happen dangers. From that, we will request each work site contractor to do site work operation.

 

However, at work sites where can often occur different methods or unthinkable aspects, in encountering every certain pose(or before encountering it), we may request patrolling again by considering each contractor’s point of view, and checking if its maintaining safety standards is becoming the safest and prompt method.

 

Therefore, by labeling as safety patrol, a general contractor requests each site contractor to go to see「In present work site situation, if safety standard decided as 〇〇 should be satisfying, or if there should be improving points」and also by maintaining work site safety, thus we are keeping construction work quality.

 

What kind of points are to be checked?                                                                                                       

 

As to what kind of points are being checked, if we directly state the conclusion,

It differs according to each work progress situation, or each work contractor.

However, as it is「safety patrol」, we should go on checking all of the points relating safety.

 

Basically,

 

・Situation of examining tools or so, and checking

・If work operation procedure is being suitably arranged, or is duly executed

・If work operation place or work operation range is kept safely, or if the method of maintaining safety is suitable?

・Ancillary to above, if putting site in order, cleaning site is executed?

 

Checking above these items or so from general work contractor to each work contractor’s supervisor.

Usually, as to safety patrol, general work contractor let each work contractor make points to check, and each work contractor’s supervisor does its evaluation. If there is an awful place, it should be corrected.

As to a lot of general work contractors, 「checking lists」are made, and evaluation will be done according to them.

As a supplement, if doing visual search of「safety patrol check list 」or so by internet, then relative checking lists of various work contractors are hit.

Actually used lists besides template should not be printed or used freely. However, as to what kind of items other companies are checking, probably it seem to be worth for reference.

 

By applying above itemized sentences to interior decorative work as much as possible, we will go on enumerating them.

 

Checking out tools and the like, and checking situation

As for interior decorative construction work too, we use a lot of tools.

This time, we are explaining them roughly as follows.

 

On foothold

(Step ladder, scaffold ladder, step stool or so)

Scaffold ladder. It is a kind of foothold presupposing work operation on top board. Extending top board area or its leg, we can change its height and length. (There is a kind unable to change its length or so too.)

 

Tools are usually set each usable life ages. They cannot be used over than the periods.

We check if a foothold used does not expire each life age, if the product is properly operating, is locked, and is not worn away, according to the manufacturer recommending checking method.

In addition, we also check if it is not rusted or mud is going into it or so, then its motion is worsened. Depending on the situation, we shall clean and maintain them.

 

On tools

(Cutter, impact driver, other construction work using electric and hand tools)

 

Same as foothold, almost all tools are also set their usable life ages.

We check if they are not used over the periods, and regular maintenances shall be done.

 

If work operation procedure is suitably set, or is accordingly executed

 

Even if the same construction work process is entrusted, possible dangerous situation at work site is changing, depending on construction work sites and work progress status.

Therefore, in the first place, when general construction work contractor enters work site, it will let each work site contractor decides 「in order to execute construction work safely and smoothly, what kind of process it should do and how to carry out 」.

 

On that, general construction work contractor will precisely let each site work contractor to patrol again if the work process is set and kept to do actual work by workers.

 

For example, please suppose「When executing this construction work at this place of ceiling, using 〇〇cm or more length scaffold ladder, not using stepladder, a single worker should not do work operation alone」, which should exist as work operation process.

As for safety patrol, we will go on checking if these are really right process, and if the process is being observed.

Even if other work site should be considered right, it may not be always safest at the work site this time still under present situation.

 

If you happen to feel something as a problem, you have to examine different method. Even if it is right, but cannot be observed, then it is meaningless. So, we shall study what to do to be able to observe.

 

If work operation area and work operation range safety are kept, and its method of keeping safety is suitable?

Above picture at our company work operation site, sticking the tape of 「Watch your head」at foothold overhead area, demanding caution

 

As many of work operation area is freshly made building, so at footing and overhead areas, opening part, or overwrapping work operation range with other types of industry or so, there are a lot of hidden dangers.

 

Therefore, at safety patrol, we will check「if the work site is kept safely and correctly as much as possible」or「how it is maintained」。

 

For example, please suppose an arrangement of 「At a work operation on 〇〇, there is a ceiling construction work with equipment contractor at the same room. Meeting in advance, then in case it is still necessary to do work in the close area at the same time, then equipment contractor does from east area, and interior decorative contractor does from west area. Both should say something in advance.」 is done.（It is still just for an example, so it is not necessarily right method of keeping work site safety.）

We are going to consider if those arrangement is precisely observed, and if there should be safer method・countermeasure.

 

Ancillary to above, whether putting work site in order and cleaning work site or so are executed or not?

 

There is a word of 5S at work site and factory, which is supposed to be must.

Respectively, these meanings are putting in order・tidying up・cleaning・neat・discipline in Japanese sound starting from S.

We check if they are executed from safety point of view.

This time, we only limit to explain roughly as below,.

If passage from material moving in entrance～to work site is neatly divided(putting in order)

If there are not easily stumbling waste materials or tools or so placed at footing area(cleaning)

Or if those are made public(discipline)

Above picture is one of 5S, cleaning is done not only for visual beauty, but also for preventing foot or leg injury for waste materials

 

Of course, delay of fixed construction work period should not happen.

If labor accident should occur, operation workers cease to work, and work site stops. Furthermore, that may lead to image down of general work contractor’s point of view. So, making light of safety means no good at all.

 

It seems that correct execution of 5S can be said reasonable.

 

Summary

We have so far briefly explained what is safety patrol, and what is watched at safety patrol.

Concisely making summary as below,

 

・Safety patrol means a kind of checking activity of general construction work contractor own or general work contractor request each work site contractor, under present work site situation, if the construction work is executed by best possible safety method and condition.

・Literally, by checking safety related items from plural viewpoints, based on advanced made check list, evaluate them.

・By maintaining work site safety, it is playing a role of preventing delay of work period arising from labor accident or image down.

 

From viewpoint of laborers working at work site, it often seems that safety patrol can be a kind of「haltering work operation efficiency, dismal habit」.

However, a general construction work contractor has to do their best to let each work contractor under to work without occurring any injury, and complete site work to the end.

We are thinking of wishing all of you to understand that safety is irrespective of general work contractor・subcontractor, which is a necessary item required for all people.

 

In addition, by observing safety at work site, there are a lot of things that we also feel relative construction work will proceed smoothly too.

 

Our company also consider to observe daily safety, and to focus our energies and minds so as not to occur labor accident from now on too.

=-=-==-=-=-=-=-==-=-=-=-=-==-=-=-=-=-==-=-=-=-=-==-=-=-

 

Let alone office・shop or store ceiling or wall recovery work, and painting work, concerning newly opening, renewal and so on, please be sure to consult with our Office restoration Dot.Com. website light heartedly.

 

We ae waiting for your follow up of our 「Instagram, Twitter, and Facebook」.

Instagram     Twitter     Facebook   

 

 

 

From price quotation up to construction work finishing, our company is directly managing and working by ourselves, so we are aiming to supply「most reasonable, high quality and good products」 to you.

Of course, we do not mind if you compare our quotation with others, as we welcome it.

「How should we execute this construction work? Or how much does it cost approximately? 」or so on.

We are waiting for your question・inquiry.

On office・shop or store・warehouse relocation, recovery or restoration work, reform work(interior decorative construction work) , and so on, please be sure to give us your inquiry light heartedly in the first place.

 

～～～～～～～～～～～～～～～～～～～～～～Ikebukuro～～～～～～～～～～～～～～～～～～～～～～

★If you look for interior finishing company in Ikebukuro, ask Office restoration Dot.Com★

★If you also look for office restoration work in Tokyo, ask Office restoration Dot.Com.★

Our address: 〒171-0014 4^th floor, Musashiya No.3 Building, 62-10, 2-chome, Ikebukuro, Toshima, Tokyo

Free phone: 0120-978-226

～～～～～～～～～～～～～～～～～INTERIOR FINISHING COMPANY～～～～～～～～～～～～～～～～～

Hello everyone！We here are Office restoration Dot.Com. website.

 

Today, we would like to explain a construction work example of system ceiling framework construction work at an office building.

In the first place, system ceiling is a kind of hanged ceiling mainly, equipment such as air-conditioner and lighting or so, mounted together with ceiling board material at attic, a ceiling set so as to be put in at bedding・frame.

A merit of system ceiling is very high maintenance quality. Let alone ceiling material itself, ceiling equipment such as lighting or so can be easily moved・changed too. Therefore, it is rather easy to correspond to layout change. When a part of ceiling material or equipment happen to be deteriorated・damaged, it can be soon renewed too. As ceiling material is mounted in a linear manner, it is also smart visually.

 

Then, we would like to explain the flowing of relative construction work.

It is construction work of ceiling recovery and restoration work after moving out sliding wall.

Sliding wall is an easily movable partition which can be partitioned in a room. Its system is moveable by using hanged rail installed at ceiling.

 

Then, the following are site pictures at system ceiling framework construction work after moving out sliding wall

 

Above all are site pictures of system ceiling framework construction work.

After this, the construction work will be completed by mounting board. However, the operation work of our company will be over by mounting framework.

 

As it is possible for our company to do any relative construction work, so please be sure to give us your inquiry light heartedly.

 

On 『office renewal・shop or store modifying』, interior decorative finishing work・restoration work and so on, if you are in trouble or worried, please feel free to give us your inquiry in the first place.

Please follow up our Instagram, Twitter, and Facebook light heartedly.

 

Instagram     Twitter     Facebook   

 

From price quotation up to construction work finishing, our company is directly managing and working by ourselves, so we are aiming to supply「most reasonable, high quality and good products」 to you.

 

～～～～～～～～～～～～～～～～～～～～～～Ikebukuro～～～～～～～～～～～～～～～～～～～～～～

★If you look for interior finishing company in Ikebukuro, ask Office restoration Dot.Com★

★If you also look for office restoration work in Tokyo, ask Office restoration Dot.Com.★

Our address: 〒171-0014 4^th floor, Musashiya No.3 Building, 62-10, 2-chome, Ikebukuro, Toshima, Tokyo

Free phone: 0120-978-226

～～～～～～～～～～～～～～～～～INTERIOR FINISHING COMPANY～～～～～～～～～～～～～～～～～

Hello everyone！We here are Office restoration Dot.Com. website.

Our company office is located at Ikebukuro, Toshima ward, Tokyo, and we are executing construction work professionally, for office buildings on《Interior decorative finishing work》《Recovery and restoration work》and so on of various construction work at buildings inside all over Kanto area for you.

 

Today, the construction work site which we are explaining is an office room located at Tanashi.

Its actual construction work detail is making partition wall(board finishing work).

The construction work period is a day.

 

Partition is, separating building inner space. The wall separating is called partition wall. It can be simply called 「inner wall」 too.

In order to use inner space effectively, by 「separating」a room classified by use such as living room, toilet, warehouse, and so on, then the room can be used effectively. This space separation is called partition.

And, the wall separating is called partition wall. As the purpose of partition wall is separating inner space, as different from outside wall, its earthquake resistance property is not required. LGS(=light gauge steel) and board are used for making partition wall. As partition wall cannot be directly installed inside the building, LGS is used as bedding. Gypsum board has sound insulating and heat resisting properties. However, compared with outside wall materials, its yield strength is relatively low.

 

The following is a construction work example picture this time.

In the first place, we go on mounting bedding by using LGS.

We go on carrying out sticking board operation work.

We completed sticking work, then the room was duly separated.

That is all for our explanation.

We recommend you to go on utilizing space by making partition wall!

Please be sure to consult with us light heartedly if you should separate your interior space.

 

On 『office renewal・shop or store modifying』, interior decorative finishing work・restoration work and so on, if you are in trouble or worried, please feel free to give us your inquiry in the first place.

Please follow up our Instagram, Twitter, and Facebook light heartedly.

 

Instagram     Twitter     Facebook   

 

 

From price quotation up to construction work finishing, our company is directly managing and working by ourselves, so we are aiming to supply「most reasonable, high quality and good products」 to you.

 

～～～～～～～～～～～～～～～～～～～～～～Ikebukuro～～～～～～～～～～～～～～～～～～～～～～

★If you look for interior finishing company in Ikebukuro, ask Office restoration Dot.Com★

★If you also look for office restoration work in Tokyo, ask Office restoration Dot.Com.★

Our address: 〒171-0014 4^th floor, Musashiya No.3 Building, 62-10, 2-chome, Ikebukuro, Toshima, Tokyo

Free phone: 0120-978-226

～～～～～～～～～～～～～～～～～INTERIOR FINISHING COMPANY～～～～～～～～～～～～～～～～～

Hello everyone！We here are Office restoration Dot.Com. website.

We are executing construction work professionally, mainly for office buildings of 【Interior decorative finishing work・Restoration work】, based at Ikebukuro, Tokyo. and all over Kanto area for you. Of course, we are also doing construction of various buildings.

 

Today, we did our partition and similar construction work at a certain room.

We can make partition at any kind of room.

If you have a request or the like to us, please give us inquiry.

According to the design drawing as usual, we are going to prepare the partition by covering blue sheet.

We go on mounting LGS(=light gauge steel). We are also going on finishing by glueing the board, and also glueing cloth and the like.

As for ceiling, we open the gap, and go on mounting there.

The finished situation is a kind of labyrinth, isn’t it?

 

That is all for today.

 

 

On 『office renewal・shop or store modifying decoration』, its interior decorative finishing work・restoration work and so on, if you are in trouble or worried, please feel free to give us your inquiry in the first place.

Please follow up our Instagram, Twitter, and Facebook light heartedly.

 

 Instagram     Twitter     Facebook   

From price quotation up to construction work finishing, our company is directly managing and working by ourselves, so we are aiming to supply「most reasonable, high quality and good products」 to you.

 

 

～～～～～～～～～～～～～～～～～～～～～～Ikebukuro～～～～～～～～～～～～～～～～～～～～～～

★If you look for interior finishing company in Ikebukuro, ask Office restoration Dot.Com★

★If you also look for office restoration work in Tokyo, ask Office restoration Dot.Com.★

Our address: 〒171-0014 4^th floor, Musashiya No.3 Building, 62-10, 2-chome, Ikebukuro, Toshima, Tokyo

Free phone: 0120-978-226

～～～～～～～～～～～～～～～～～INTERIOR FINISHING COMPANY～～～～～～～～～～～～～～～～～

Hello everyone！We here are Office restoration Dot.Com. website.

We are executing construction work professionally, mainly for office buildings of 【Interior decorative finishing work・Restoration work】, based at Ikebukuro, Tokyo. and all over Kanto area for you. Of course, we are also doing construction of various buildings.

 

Then, today, we are explaining,

Skeleton and office restoration construction work

In the first place, if we search the word of skeleton by internet, it will always come to appear with restoration construction work.

Skeleton is pointed to be complex of body structure such as pillar・beam・floor and so on which support building. 「Skeleton」which comes out when looking for shop or store property means room situation without interior decorative facility. In this case, the meaning is close to former decorative furnished property. Former decorative furnished property is the situation with interior decorative facility of former shop or store.

When moving into a property and exchanging contract sheet, in almost all the cases, property is presupposed to be returned to 「originally restored」skeleton situation when leaving out. That is, basic condition is 「skeleton renting, and skeleton return」.

Furthermore, if simply making summary, it means,

「Things which is used, please return with original situation」.

In the event of renting property, before moving out of it, it is necessary to restore it originally.

In the case of renting for living, vacant room cleaning is often carried out at the cost of tenant owner.

However, in the case of shop or store, renter is responsible for the cost generally before leaving out, and it is also described so in the contract sheet. As the term of restoring originally indicates, it is necessary to return with original situation before entering into the property.

Especially, if the room layout was greatly changed, it is necessary to repair or restore not only partition wall, but also ceiling, floor and so on.

In the event of entering into a property and open shop or store, it is necessary to consider probable arising cost when leaving out in advance.

 

We are going to explain a few points as follows which to be known and understood on restoration construction work of shop or store. Please refer to them for your reference of selecting property.

 

Restoring construction work is called to be a kind of work for returning to the original situation of moving out equipment, and carrying out repairing floor, wall, or ceiling, then enable the next shop or store renter to easily enter into the property.

 

In that case, there are two kinds of construction work, one is only restoring to original situation when own self entered into the propertybefore, and the other is skeleton work to take away all except building structure.

 

As for restoring construction work, as it is only necessary to restore to the situation when entered into the property by removing installed equipment and taking away partition wall and others, then return the property after re-covering cloth or floor.

While, in the case of skeleton work, it is necessary to move out all except basic structure such as beam, pillar, outside wall, and roof.

In the case of steel reinforced concrete building used for tenant, it is treated as the situation of undressed concrete.

The cost differs greatly whether it is required restoration work or required skeleton work.

However, there are a lot of cases to be required skeleton work as restoration work. In that case, it is a sequence of work of interior decorative demolition work, skeleton work, up to waste disposal.

In general, in the case of rented a property as skeleton situation, skeleton work is required before returning the property.

 

However, there still are exceptional cases.

Even though it is a former decorative furnished property, skeleton work may be required when returning property.

In accordance with the thought of restoring originally, the property is to be returned as former decorative furnished property situation.

When renting decorative furnished property, there is a merit of reducing cost of equipment or partition, too.

Instead of that, before leaving out of the property, there may be a contract of required as skeleton situation when returning it.

In the case of renting shop or store, we recommend you to be sure to check the contract with the lender properly.

 

That is all for our explanation today.

 

On 『office renewal・shop or store modifying decoration』, its interior decorative finishing work・restoration work and so on, if you are in trouble or worried, please feel free to give us your inquiry in the first place.

Please follow up our Instagram, Twitter, and Facebook light heartedly.

 

 Instagram     Twitter     Facebook   

From price quotation up to construction work finishing, our company is directly managing and working by ourselves, so we are aiming to supply「most reasonable, high quality and good products」 to you.

 

 

～～～～～～～～～～～～～～～～～～～～～～Ikebukuro～～～～～～～～～～～～～～～～～～～～～～

★If you look for interior finishing company in Ikebukuro, ask Office restoration Dot.Com★

★If you also look for office restoration work in Tokyo, ask Office restoration Dot.Com.★

Our address: 〒171-0014 4^th floor, Musashiya No.3 Building, 62-10, 2-chome, Ikebukuro, Toshima, Tokyo

Free phone: 0120-978-226

～～～～～～～～～～～～～～～～～INTERIOR FINISHING COMPANY～～～～～～～～～～～～～～～～～